YotaTech Forums
I was able to extend my steering shaft by welding the two I had together
I was able to extend my steering shaft by welding the two I had together
0 2020/04/22 16:04:47
Dang at least the brake lines line up just right 🤙🤙
Dang at least the brake lines line up just right 🤙🤙
0 2020/03/26 20:23:07
And to deal with lengthening this steering shaft, I may need to combine the two to make it happen.
And to deal with lengthening this steering shaft, I may need to combine the two to make it happen.
0 2020/03/26 20:22:28
Now to deal with what wires need to go and what ones need to stay
Now to deal with what wires need to go and what ones need to stay
0 2020/03/26 20:21:25
Annnnd it's on, all new body mounts/hardware and a 1" body lift , need to weld in the body mounts behind the doors and get th e front ones figured out
Annnnd it's on, all new body mounts/hardware and a 1" body lift , need to weld in the body mounts behind the doors and get th e front ones figured out
0 2020/03/26 20:20:21
Definitely alot harder than it looks especially by yourself.
Definitely alot harder than it looks especially by yourself.
0 2020/03/26 20:19:05
Looks like it fits 👌
Looks like it fits 👌
0 2020/03/26 20:17:07
Chain hoist definitely gets it high enough
Chain hoist definitely gets it high enough
0 2020/03/26 20:15:53
Got it drug over to my chain hoist
Got it drug over to my chain hoist
0 2020/03/26 20:11:58
Fits like a glove, all but 1 bolt on the rear side
Fits like a glove, all but 1 bolt on the rear side
0 2020/02/19 21:20:44
Upper tank is 89-95, lower is 84-88
Upper tank is 89-95, lower is 84-88
0 2020/02/19 21:20:30
0 2020/02/19 21:20:13
First coat of some plain black Rust-Oleum
First coat of some plain black Rust-Oleum
0 2020/02/19 21:19:59
Got the necessary body mounts removed and smoothed up
Got the necessary body mounts removed and smoothed up
0 2020/02/19 21:19:44
0 2020/02/19 21:19:32
0 2020/02/19 21:19:16
Old fuel tank, And spring mount that needs welded on the inside.
Old fuel tank, And spring mount that needs welded on the inside.
0 2020/02/19 21:19:00
Got a little more surface rust knocked down.
Got a little more surface rust knocked down.
0 2020/02/19 21:18:44
As it sits for now
As it sits for now
0 2020/02/19 21:15:04
And knocked the rest of the surface rust/grease and dirt off with some wire wheels.
And knocked the rest of the surface rust/grease and dirt off with some wire wheels.
0 2020/02/19 21:14:44
With the help of a couple buddies, got it pulled and pressure washed.
With the help of a couple buddies, got it pulled and pressure washed.
0 2020/02/19 21:14:26
0 2020/02/19 21:14:02
0 2020/02/19 21:13:45
By far the most redneck thing done to get this build done.
By far the most redneck thing done to get this build done.
0 2020/02/19 21:12:26
All laid out and ready to go
All laid out and ready to go
0 2020/02/18 16:55:22
0 2020/02/18 16:54:40
Getting the all the necessary stuff pulled and laid onto the motor
Getting the all the necessary stuff pulled and laid onto the motor
0 2020/02/18 16:54:09
0 2020/02/18 16:53:37
About 6 hours and an 18 pack later 😂
About 6 hours and an 18 pack later 😂
0 2020/02/18 16:52:30
Starting on pulling the donor body
Starting on pulling the donor body
0 2020/02/18 16:51:47
Getting them moved to the new place "didn't help the timeline"
Getting them moved to the new place "didn't help the timeline"
0 2020/02/18 16:50:57
0 2020/02/18 16:45:24
0 2020/02/18 16:29:06
0 2020/02/18 16:28:33
Went through and cleaned it up a bit more before a quick rattle can paint job
Went through and cleaned it up a bit more before a quick rattle can paint job
0 2020/02/18 16:27:54
0 2020/02/18 16:27:14
0 2020/02/18 16:26:26
With the help of a couple buddies we got the frame pressure washed and most of the surface rust cleaned up
With the help of a couple buddies we got the frame pressure washed and most of the surface rust cleaned up
0 2020/02/18 16:25:38
0 2020/02/18 16:23:42
0 2020/02/18 16:22:42