YotaTech Forums
The start of removing the donor body, don't have concrete yet 😬
The start of removing the donor body, don't have concrete yet 😬
0 2020/02/18 16:12:35
Me and a buddy were able to pull it off in about 6 hours and an 18 pack 😂
Me and a buddy were able to pull it off in about 6 hours and an 18 pack 😂
0 2020/02/18 16:13:51
0 2020/02/18 16:14:52
Got the body on some janky wooden stands but they'll do, take note when measuring how high you need the frame stand add a foot, didn't take into account the 2x6 width and had to flatten the tires to slide the frame out 🤦‍♂️
Got the body on some janky wooden stands but they'll do, take note when measuring how high you need the frame stand add a foot, didn't take into account the 2x6 width and had to flatten the tires to slide the frame out 🤦‍♂️
0 2020/02/18 16:18:12
Just some removal photos of all the wiring and crap
Just some removal photos of all the wiring and crap
0 2020/02/18 16:18:56
0 2020/02/18 16:19:40
All laid onto the motor ready to go
All laid onto the motor ready to go
0 2020/02/18 16:20:31
By far the most redneck thing I've had to do this far 👌
By far the most redneck thing I've had to do this far 👌
0 2020/02/18 16:21:34
0 2020/02/18 16:22:42
0 2020/02/18 16:23:42
With the help of a couple buddies we got the frame pressure washed and most of the surface rust cleaned up
With the help of a couple buddies we got the frame pressure washed and most of the surface rust cleaned up
0 2020/02/18 16:25:38
0 2020/02/18 16:26:26
0 2020/02/18 16:27:14
Went through and cleaned it up a bit more before a quick rattle can paint job
Went through and cleaned it up a bit more before a quick rattle can paint job
0 2020/02/18 16:27:54
0 2020/02/18 16:28:33
0 2020/02/18 16:29:06
0 2020/02/18 16:45:24
Getting them moved to the new place "didn't help the timeline"
Getting them moved to the new place "didn't help the timeline"
0 2020/02/18 16:50:57
Starting on pulling the donor body
Starting on pulling the donor body
0 2020/02/18 16:51:47
About 6 hours and an 18 pack later 😂
About 6 hours and an 18 pack later 😂
0 2020/02/18 16:52:30
0 2020/02/18 16:53:37
Getting the all the necessary stuff pulled and laid onto the motor
Getting the all the necessary stuff pulled and laid onto the motor
0 2020/02/18 16:54:09
0 2020/02/18 16:54:40
All laid out and ready to go
All laid out and ready to go
0 2020/02/18 16:55:22
By far the most redneck thing done to get this build done.
By far the most redneck thing done to get this build done.
0 2020/02/19 21:12:26
0 2020/02/19 21:13:45
0 2020/02/19 21:14:02
With the help of a couple buddies, got it pulled and pressure washed.
With the help of a couple buddies, got it pulled and pressure washed.
0 2020/02/19 21:14:26
And knocked the rest of the surface rust/grease and dirt off with some wire wheels.
And knocked the rest of the surface rust/grease and dirt off with some wire wheels.
0 2020/02/19 21:14:44
As it sits for now
As it sits for now
0 2020/02/19 21:15:04
Got a little more surface rust knocked down.
Got a little more surface rust knocked down.
0 2020/02/19 21:18:44
Old fuel tank, And spring mount that needs welded on the inside.
Old fuel tank, And spring mount that needs welded on the inside.
0 2020/02/19 21:19:00
0 2020/02/19 21:19:16
0 2020/02/19 21:19:32
Got the necessary body mounts removed and smoothed up
Got the necessary body mounts removed and smoothed up
0 2020/02/19 21:19:44
First coat of some plain black Rust-Oleum
First coat of some plain black Rust-Oleum
0 2020/02/19 21:19:59
0 2020/02/19 21:20:13
Upper tank is 89-95, lower is 84-88
Upper tank is 89-95, lower is 84-88
0 2020/02/19 21:20:30
Fits like a glove, all but 1 bolt on the rear side
Fits like a glove, all but 1 bolt on the rear side
0 2020/02/19 21:20:44
Got it drug over to my chain hoist
Got it drug over to my chain hoist
0 2020/03/26 20:11:58