YotaTech Forums
0 2017/02/22 10:21:59
0 2017/02/22 10:23:30
0 2017/02/22 10:24:33
0 2017/02/22 10:25:36
0 2017/02/22 10:32:01
0 2017/02/22 10:32:46
0 2017/02/22 10:33:36
I picked this wheel up about 7 years ago to use for my 81 but never got it done.
I picked this wheel up about 7 years ago to use for my 81 but never got it done.
0 2017/02/22 13:23:50
Luckily all the plastic is in reasonable condition.
Luckily all the plastic is in reasonable condition.
0 2017/02/22 13:24:46
The wires themselves are a little crunchy so I will rewire them.
The wires themselves are a little crunchy so I will rewire them.
0 2017/02/22 13:27:33
0 2017/02/22 13:28:37
Without taking the wheel apart and probably ruining the rubber, I will hand sand the metal and por15.
Without taking the wheel apart and probably ruining the rubber, I will hand sand the metal and por15.
0 2017/02/22 13:29:46
The center cap before....
The center cap before....
0 2017/02/22 13:33:07
Horn buttons before...
Horn buttons before...
0 2017/02/22 13:33:36
0 2017/02/22 13:34:02
And after. I was thinking about taking some 1500 grit sandpaper to the horn buttons to get a cleaner finish but then I would lose the horn logo as it is not raised and I wouldn't be able to recreate the graphic. Still undecided.
And after. I was thinking about taking some 1500 grit sandpaper to the horn buttons to get a cleaner finish but then I would lose the horn logo as it is not raised and I wouldn't be able to recreate the graphic. Still undecided.
0 2017/02/22 13:34:32
0 2017/02/22 14:21:29
Better than new. Well, almost.
Better than new. Well, almost.
0 2017/02/22 14:21:47
0 2017/02/22 14:22:06
0 2017/02/23 11:24:06
0 2017/02/23 11:24:45
0 2017/02/23 15:16:04
0 2017/02/24 14:34:20
0 2017/02/24 17:39:35
0 2017/02/25 15:48:18
0 2017/02/25 15:48:33
The brake line inside the rail was brittle. I'm glad the po used this as a farm rig and not for the street.
The brake line inside the rail was brittle. I'm glad the po used this as a farm rig and not for the street.
0 2017/02/27 18:38:11
0 2017/02/27 18:38:51
I think when the clay is scraped off there may only be some light rust.
I think when the clay is scraped off there may only be some light rust.
0 2017/02/27 18:39:28
I think I may run a flat bed while I'm doing the metal work on the bed.
I think I may run a flat bed while I'm doing the metal work on the bed.
0 2017/02/27 18:39:59
0 2017/02/27 18:41:49
0 2017/02/27 18:42:27
The cross members are surprisingly in relatively good shape. I won't have to use the spares I have.
The cross members are surprisingly in relatively good shape. I won't have to use the spares I have.
0 2017/02/27 18:43:02
This is what was left of the failed brake line. It rusted so badly it was the diameter of a pencil lead.
This is what was left of the failed brake line. It rusted so badly it was the diameter of a pencil lead.
0 2017/02/27 18:43:47
0 2017/02/27 18:44:22
0 2017/02/27 18:44:36
0 2017/02/27 18:45:04
0 2017/02/27 18:45:28
0 2017/02/27 18:45:50
0 2017/02/27 18:46:01