YotaTech Forums
0 2015/10/29 04:08:45
0 2015/10/29 04:10:40
0 2015/10/29 04:13:13
0 2015/10/30 21:15:10
0 2015/10/31 02:44:44
0 2015/11/05 06:06:18
0 2015/11/08 15:18:10
0 2015/11/09 15:59:56
0 2015/11/09 16:00:17
0 2015/11/09 16:03:47
0 2015/11/09 16:04:06
0 2015/11/09 16:14:22
0 2015/11/09 16:48:50
0 2015/11/12 01:25:10
0 2015/11/12 08:29:10
0 2015/11/12 08:29:36
0 2015/11/12 08:29:59
0 2015/11/15 12:07:45
0 2015/11/15 12:11:11
4runner moulding clips
4runner moulding clips
0 2016/01/27 17:10:15
0 2016/01/27 17:10:45
0 2016/01/27 17:10:57
0 2016/02/04 14:40:01
0 2016/02/11 17:40:12
Added the connector through the grill (grill will be replaced down the road)
Added the connector through the grill (grill will be replaced down the road)
0 2016/02/11 17:40:40
Easy connection
Easy connection
0 2016/02/11 17:41:37
The charger has settings for different batteries, gives you battery status.
The charger has settings for different batteries, gives you battery status.
0 2016/02/11 17:42:04
0 2016/02/12 19:27:38
0 2016/02/16 21:33:00
0 2016/02/16 21:33:24
0 2016/02/16 21:33:42
0 2016/02/26 15:37:42
0 2016/02/27 10:19:13
0 2016/02/27 10:27:17
Before
Before
0 2016/03/11 15:57:03
There were too thick
There were too thick
0 2016/03/11 15:57:54
So cut an inch off the cooling fins. I did this on the 81 too and didn't have any issues with the lights. They aren't on that long so heat dissipation should not be too big of issue
So cut an inch off the cooling fins. I did this on the 81 too and didn't have any issues with the lights. They aren't on that long so heat dissipation should not be too big of issue
0 2016/03/11 15:58:34
0 2016/03/11 16:02:31
0 2016/03/11 16:04:36
0 2016/03/11 16:08:30