YotaTech Forums
tail gate to tall and wide
tail gate to tall and wide
0 2012/06/25 06:44:38
to short
to short
0 2012/06/25 06:44:38
started with
started with
0 2012/06/25 06:44:38
skinned shell sitting on truck for mock-up trying to decide to stretch the front or rear or both....to fit the bed.
skinned shell sitting on truck for mock-up trying to decide to stretch the front or rear or both....to fit the bed.
0 2012/06/25 06:50:09
skinned the shell
skinned the shell
0 2012/06/25 06:50:09
chopped 2" off the hight and 1/2" off the width to fit the tailgate. Had to remove all hardware for the tail gate
chopped 2" off the hight and 1/2" off the width to fit the tailgate. Had to remove all hardware for the tail gate
0 2012/06/25 06:50:09
decided to stretch the front after getting the tailgate to fix
decided to stretch the front after getting the tailgate to fix
0 2012/06/25 06:54:43
built guides to slide the shell on out of 1" angle aluminum
built guides to slide the shell on out of 1" angle aluminum
0 2012/06/25 06:54:43
front extension made out of angle aluminum
front extension made out of angle aluminum
0 2012/06/25 06:54:43
top rail extention with over abundance of pop rivits
top rail extention with over abundance of pop rivits
0 2012/06/25 06:59:04
bottom extensions
bottom extensions
0 2012/06/25 06:59:04
inside of bottom extension
inside of bottom extension
0 2012/06/25 06:59:04
angle of extentions on narrowed front on passenger side
angle of extentions on narrowed front on passenger side
0 2012/06/25 07:07:44
driver side angle of extention
driver side angle of extention
0 2012/06/25 07:07:44
front profile in the middle it is level with the cab and on the sides it sticks up a little more than I wanted but it will do
front profile in the middle it is level with the cab and on the sides it sticks up a little more than I wanted but it will do
0 2012/06/25 07:07:44
frame of shell almost complete
frame of shell almost complete
0 2012/06/25 07:14:22
frame of shell sitting on bed
frame of shell sitting on bed
0 2012/06/25 07:14:22
rear view ot frame
rear view ot frame
0 2012/06/25 07:14:22
back door cut down
back door cut down
0 2012/06/27 15:29:04
sorry splices
sorry splices
0 2012/06/27 15:29:04
the door fits
the door fits
0 2012/06/27 15:29:04
it works
it works
0 2012/06/27 15:33:48
miter good...lol
miter good...lol
0 2012/06/27 15:33:48
type of hinge
type of hinge
0 2012/06/27 15:33:48
failed atempt to stop the side to side wobble.
failed atempt to stop the side to side wobble.
0 2012/06/28 05:27:41
cut down and installed
cut down and installed
0 2012/06/30 20:23:27
storm door opens good drags on the bottom just a little I have to raise the bottom hinge about 1/8 of an inch
storm door opens good drags on the bottom just a little I have to raise the bottom hinge about 1/8 of an inch
0 2012/06/30 20:23:27
all fits good pealed off the old spray on bed liner that was put on it..
all fits good pealed off the old spray on bed liner that was put on it..
0 2012/06/30 20:23:27
both doors flipped up for good access to the bed
both doors flipped up for good access to the bed
0 2012/06/30 20:28:54
it will even open up side down...lol just showing both doors flipped up
it will even open up side down...lol just showing both doors flipped up
0 2012/06/30 20:28:54
Toyota Pulsar[1]
Toyota Pulsar[1]
0 2012/08/22 12:08:24