YotaTech Forums
Just so it's not completely ignored I added the back pic, I don't even know what I'm gonna do with this mess, we'll go into that later.
Just so it's not completely ignored I added the back pic, I don't even know what I'm gonna do with this mess, we'll go into that later.
0 2012/03/25 16:07:24
The seats need some work and that console is out of a ford explorer. Not sure about putting ford parts on a toyota but what the hell it works for now.
The seats need some work and that console is out of a ford explorer. Not sure about putting ford parts on a toyota but what the hell it works for now.
0 2012/03/25 16:07:24
At least we wont get lost and even if we do well be able to listen to music.
At least we wont get lost and even if we do well be able to listen to music.
0 2012/03/25 15:55:08
Once I'm finished you'll see the propane door, stove vent (top rear) and electrical inlet (bottom rear). I also need to find driver side mirrors, the frame work is all in tact I only need the actual casing that bolts onto the frame tubes.
Once I'm finished you'll see the propane door, stove vent (top rear) and electrical inlet (bottom rear). I also need to find driver side mirrors, the frame work is all in tact I only need the actual casing that bolts onto the frame tubes.
2 2012/03/25 15:55:08
The interior has taken the worst beating of all. Unfortunately wal-mart will sell spray paint to anyone.
The interior has taken the worst beating of all. Unfortunately wal-mart will sell spray paint to anyone.
1 2012/03/25 15:55:08
I need to install straps to hold the propane tank in place. There is my only missing hubcap, if anyone has two of them I'd like to buy them. the wheels are going to go black with chrome valve stems and red anodized aluminum valve caps. The brake drums and calipers will be red. The water fill and water outlet mechanisms (for lack of a better word) need redone. I want the end look to be cleaner, the two vents you see towards the front will be removed completely.
I need to install straps to hold the propane tank in place. There is my only missing hubcap, if anyone has two of them I'd like to buy them. the wheels are going to go black with chrome valve stems and red anodized aluminum valve caps. The brake drums and calipers will be red. The water fill and water outlet mechanisms (for lack of a better word) need redone. I want the end look to be cleaner, the two vents you see towards the front will be removed completely.
1 2012/03/25 15:50:45
I replaced the battery, plugs, plug wires, distributor cap and rotor, points, air and fuel filters, then gave it an oil change. Then she started right up, runs like a champ.
I replaced the battery, plugs, plug wires, distributor cap and rotor, points, air and fuel filters, then gave it an oil change. Then she started right up, runs like a champ.
1 2012/03/25 15:50:45
I've got some work to do back here, the door is in rough shape. I'm planning to make a new one, just haven't had the right idea for hw I want it yet. If you look at the top of the dark brown stripe just to the right youll see one of two fiberglass repairs I have to do, the other is on the top (right side near the back). Also the bumper has a twist in it on the left and to a lesser degree on the right, after I unmangle it the bumper goes black and black grip tape goes on the step.
I've got some work to do back here, the door is in rough shape. I'm planning to make a new one, just haven't had the right idea for hw I want it yet. If you look at the top of the dark brown stripe just to the right youll see one of two fiberglass repairs I have to do, the other is on the top (right side near the back). Also the bumper has a twist in it on the left and to a lesser degree on the right, after I unmangle it the bumper goes black and black grip tape goes on the step.
1 2012/03/25 15:50:45
When I began the grill was chrome plated plastic that had been worn down to grey in several places, the black above and below the bumper was white, I also added red to the grill ornament. I still need to bring the chrome back to life.
When I began the grill was chrome plated plastic that had been worn down to grey in several places, the black above and below the bumper was white, I also added red to the grill ornament. I still need to bring the chrome back to life.
0 2012/03/25 15:43:24
I am amazed by this engine, simple, efficient, rugged and it looks nice too. what more could I want.
I am amazed by this engine, simple, efficient, rugged and it looks nice too. what more could I want.
0 2012/03/25 15:43:24
You can see the difference the new white makes on the fender. If you follow the ridge on the bottom of the body, everything below will be black and above will be white. I haven't decided how to do the door in back yet.
You can see the difference the new white makes on the fender. If you follow the ridge on the bottom of the body, everything below will be black and above will be white. I haven't decided how to do the door in back yet.
1 2012/03/25 15:43:24