YotaTech Forums
Share Your Pictures with Our Community. Upload Now
0 2025/04/04 21:32:59
stock Toyota Tacoma switch, needed with DPDT Relay and 5amp fuse (i used 10amp)
stock Toyota Tacoma switch, needed with DPDT Relay and 5amp fuse (i used 10amp)
0 2025/04/04 21:10:25
(on)-off-(on) switch no relay required just 5amp fuse
(on)-off-(on) switch no relay required just 5amp fuse
0 2025/04/04 21:10:06
this is the plug that plugs in to the Truck i cut it off and used the other side to the Elocker motor
this is the plug that plugs in to the Truck i cut it off and used the other side to the Elocker motor
0 2025/04/04 21:09:46
0 2025/04/04 21:09:22
this is the plug that plugs in to the Truck i cut it off and used the other side to the Elocker motor
this is the plug that plugs in to the Truck i cut it off and used the other side to the Elocker motor
0 2025/04/04 21:05:55
0 2025/04/04 21:05:31
stock Toyota Tacoma switch, needed with DPDT Relay and 5amp fuse (i used 10amp)
stock Toyota Tacoma switch, needed with DPDT Relay and 5amp fuse (i used 10amp)
0 2025/04/04 20:50:58
(on)-off-(on) switch no relay required just 5amp fuse
(on)-off-(on) switch no relay required just 5amp fuse
0 2025/04/04 20:50:39
0 2025/04/04 10:49:41
0 2025/04/03 21:15:01
0 2025/04/03 11:28:55
Advertisement
When the cam pulley is at 0
When the cam pulley is at 0
0 2025/04/03 09:10:11
Cam pulley at first mark on cover
Cam pulley at first mark on cover
0 2025/04/03 09:09:55
First mark on cover
First mark on cover
0 2025/04/03 09:09:31
0 2025/04/02 13:00:20
0 2025/04/02 12:59:17
0 2025/04/02 12:59:02
0 2025/04/02 12:58:42
0 2025/04/02 06:41:41
0 2025/04/02 06:41:35
0 2025/04/02 06:41:29
I have a 1994 Toyota pick up 22re I still get the initial Toyota chime even with truck on (I did a toggle switch starter to drive it)
I have a 1994 Toyota pick up 22re I still get the initial Toyota chime even with truck on (I did a toggle switch starter to drive it)
0 2025/04/01 18:19:02
0 2025/03/31 19:36:21
Looking down at the left hand mounting point. Two bolts on the top and two on the bottom per side.
Looking down at the left hand mounting point. Two bolts on the top and two on the bottom per side.
0 2025/03/30 17:18:58
Side view of bumper C clamped in place
Side view of bumper C clamped in place
0 2025/03/30 17:18:56
Front view of bumper. The bottom of the bracket is the shiny piece of steel beneath the bottom tube. Truck is parked too close to front wall of shop for a good picture.
Front view of bumper. The bottom of the bracket is the shiny piece of steel beneath the bottom tube. Truck is parked too close to front wall of shop for a good picture.
0 2025/03/30 17:18:54
Angled view of bracket.
Angled view of bracket.
0 2025/03/30 17:15:28
View from the front with top two bolts installed in bracket.
View from the front with top two bolts installed in bracket.
0 2025/03/30 17:15:26
View from engine compartment looking at rear mounting bolt and tab.
View from engine compartment looking at rear mounting bolt and tab.
0 2025/03/30 17:15:23
Side view of bumper C clamped in place.
Side view of bumper C clamped in place.
0 2025/03/30 16:57:52
Looking down at the mounting points for the bumper to bracket. Two top bolts and two bottom bolts per side.
Looking down at the mounting points for the bumper to bracket. Two top bolts and two bottom bolts per side.
0 2025/03/30 16:57:49
Advertisement