Notices
86-95 Trucks & 4Runners 2nd/3rd gen pickups, and 1st/2nd gen 4Runners with IFS

86 truck part alternatives

Thread Tools
 
Search this Thread
 
Old Sep 30, 2006 | 05:41 AM
  #1  
old 86's Avatar
Thread Starter
Registered User
 
Joined: Sep 2006
Posts: 14
Likes: 0
From: Essex, MA
86 truck part alternatives

I was reading a post a few days back while looking for some rear leafsprings and somebody mentioned that you could use 88-98 chevy 1/2 ton 2wd and 4wd rear leafsprings instead of toyota ones. So I decided to see if there was anybody out there who could offer more info on this point, but it also got me wondering if anybody knows of parts we can steel from other makes that go into toy pickups without much hassle or reworking.

Stuff like a 302 for v8 supposedly goes in with just heavier duty engine mounts and a new bellhousing, but smaller items too.

Thanks all

Last edited by old 86; Sep 30, 2006 at 08:36 AM.
Reply
Old Sep 30, 2006 | 06:14 AM
  #2  
Hiridentoyguy's Avatar
Registered User
 
Joined: Sep 2006
Posts: 84
Likes: 0
From: Kansas
for the chevy springs, you would most likely have to remount your shackles-not that, OR SAFE unless you are an experianced welder. As far as other parts. Personaly, I would stick with Toyota! just my oppinion. GL-Hiriden
Reply
Old Sep 30, 2006 | 08:01 AM
  #3  
reggie 00's Avatar
Contributing Member
 
Joined: Apr 2006
Posts: 988
Likes: 0
From: Vacaville,California
There are different springs from different trucks you can use.
Some if not all of them will require you to remove your existing hanger and weld a New one to a different location.

A lot of people run Chevy springs, they are longer than Toyota, 63" if i remember right to Toyota's 43" (iirr). This gives you better Articulation out back.

We have used ford F-150 springs on my brothers truck. do not remember the length, believe they where 2wd.

We did the same thing in a buddies 82, and used jeep wagoner springs on the front.

The other thing you will have to do is get new shocks. When we did my brothers he got longer shocks and we mounted them different.

Best thing to possibly do is search here for leaf springs. A couple other sites like pirate and 4crawler always seem to hold a wealth of info also.

But do some more research to confirm everything and good luck.
Reply
Old Sep 30, 2006 | 08:29 AM
  #4  
old 86's Avatar
Thread Starter
Registered User
 
Joined: Sep 2006
Posts: 14
Likes: 0
From: Essex, MA
Thanks, I think I will end up sticking with stock springs for now, found somebody with them in PA and there is a old 4runner sitting in the tall grass up the road I need to go check out might have some good springs there as well.

As for other parts from other makes this is more of a curiousity, figure the information might come in handy some day, parts are scare around here sometimes.

Last edited by old 86; Sep 30, 2006 at 08:35 AM.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
the1998sr5
95.5-2004 Tacomas & 96-2002 4Runners
6
Oct 19, 2016 12:48 PM
bigblue82
General Electrical & Lighting Related Topics
10
Jul 6, 2015 08:27 AM
Crazy_Guy97
Buying & Selling Advice - Feeler/Gauging Interest
12
Jun 24, 2015 04:02 PM
paxanders
86-95 Trucks & 4Runners (Build-Up Section)
3
Jun 21, 2015 06:29 AM
Land yacht
95.5-2004 Tacomas & 96-2002 4Runners
3
Jun 28, 2002 09:53 AM




All times are GMT -8. The time now is 02:00 PM.