My son and I are swapping the windows in his '89 4Runner, upgrading to power windows. I have all the parts here, but we're just not sure where to drill the holes for the wires that pass from the edge of the door to the door jamb. Would like them to be in as close to the stock location as possible. Can someone here who has a truck of thsi vintage ('84-88 pickup or '84-89 4Runner) with power windows take a quick shot of the hinge area of the door (with the door open, of course) so we can see where to put the wires?

We're also ditching the vent windows, since the power window parts are for non-vent windows. We'll probably move the door mirrors forward, just wondering how far back from the front edge of the door the mirror should be mounted. A pic and a measurement would be really helpful.

Thanks!!

 

You gotta drill holes in the door and the body or just one or the other? I got a pic of the hole in the body, but not the door, but you can match it up from there I would guess.

Not the greatest of pics.

 

We have to drill both holes, the truck has manual crank windows now.

Thanks, that about where I figured the body hole goes, now just to find out where the holes are in the doors...

 

Heres a pic from my 87 - if you dont have the hole in the door already, the wires do drop down about 2 inches.

 

Well I didnt think I could but i got one with the tape in there - hope it helps

 

Most excellent! Thanks!!

 

Can you give some advise on the install?