95.5-2004 Tacomas & 96-2002 4Runners 4th gen pickups and 3rd gen 4Runners

2003 toyota seqouia cuts off in gear

Thread Tools
 
Search this Thread
 
Old Nov 12, 2005 | 05:25 PM
  #1  
ozeke2001's Avatar
Thread Starter
Registered User
 
Joined: Nov 2005
Posts: 1
Likes: 0
Question 2003 toyota seqouia cuts off in gear

I have A toyota seqouia limited 2003 that starts right up and runs fine,
but when I go to put it in drive or reverse it shuts right off,
someone told me that it may be the idle air control valve, because it runs just fine when not put in gear and also if I put the car in neutral and then put it into drive or reverse it will move and I have actually driven the car down the street when doing this, but it feels like it wants to cut off.
the fuel pump and fuel pressure is just fine, so I just cant figure out why it would cutoff when put in gear, it goes thru the gears just fine and im still trying to figure out why when I put it in neutral that it moves,
Any info would greatly be appreciated.
Reply
Old Nov 14, 2005 | 07:59 AM
  #2  
celica's Avatar
Registered User
 
Joined: Aug 2005
Posts: 1,769
Likes: 1
How many miles on it? You might still have warranty and if you do get it in there before it expires. I have never heard of this problem. Let me know as I have the same truck.

Matt
Reply
Old Nov 14, 2005 | 10:14 AM
  #3  
mkmarz's Avatar
Registered User
 
Joined: Mar 2005
Posts: 59
Likes: 0
Originally Posted by ozeke2001
I have A toyota seqouia limited 2003 that starts right up and runs fine,
but when I go to put it in drive or reverse it shuts right off,
someone told me that it may be the idle air control valve, because it runs just fine when not put in gear and also if I put the car in neutral and then put it into drive or reverse it will move and I have actually driven the car down the street when doing this, but it feels like it wants to cut off.
the fuel pump and fuel pressure is just fine, so I just cant figure out why it would cutoff when put in gear, it goes thru the gears just fine and im still trying to figure out why when I put it in neutral that it moves,
Any info would greatly be appreciated.
good chance its your MAF. pull it out carb clean it. cleaning might not do it, might need to be replaced. Its really hard to diag something like this without live data.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
voiddweller
86-95 Trucks & 4Runners (Build-Up Section)
19
May 2, 2016 09:10 PM
YotaLogic
Axles - Suspensions - Tires - Wheels
12
Nov 17, 2015 06:27 AM
Ole_Red_95_4Runner
86-95 Trucks & 4Runners
1
Jun 26, 2015 06:43 PM
ACZR
95.5-2004 Tacomas & 96-2002 4Runners
0
Jun 23, 2015 07:55 PM




All times are GMT -8. The time now is 06:02 AM.