I am reinstalling my 3.0 and wasn't a hundred percent sure where the connection in the picture is supposed to go? I thought just to be safe I would post for some one to help me out! It is on the cable that runs from the battery to the starter solenoid. Thanks for any help!

Got my FPT working again so I could upload a better picture...

http://www.users.qwest.net/~braverex...artercable.JPG

 

Looks like the wire I got going to my positive battery post.

 

looks like the one that grounds at the nut right behind it.

 

the nut right behind it is the mounting post for holding the cable in place...

 

hmmm...coulda sworn I had a ground there, let me go look at my truck and see if I can help u out.

 

It grounds to the block in front of the motormount.

 

I updated the picture above with a better one... Daryl, which bolt does it ground to on the block?
Thanks guys!
Travis

 

ooh ooh I got it, it grounds to the front of the block on the pass side just above the oil pan. right next to some bracket thingy that coomes down from above (didn't see what it connected to)

 

Sweet! Got it thanks again guys!!!