Need help with truck starting
Jun 12, 2005 | 12:11 PM
#1
Thread Starter
Contributing Member
Joined: Jul 2004
Posts: 107
Likes: 0
From: Alden, New York, Suburb of Buffalo, NY
Need help with truck starting
Hi
Have a 1990 Toyota pickup 4X4 with the 3.slow V-6, manual transmission. When I go to start the truck by depressing the clutch nothing happens. Once I push the "Start/Cancel" switch on the dash she starts right up. What am I looking for? Thanks in advance for any help offered
Jerry
Have a 1990 Toyota pickup 4X4 with the 3.slow V-6, manual transmission. When I go to start the truck by depressing the clutch nothing happens. Once I push the "Start/Cancel" switch on the dash she starts right up. What am I looking for? Thanks in advance for any help offered
Jerry
Jun 12, 2005 | 12:25 PM
#2
Contributing Member
Joined: Nov 2004
Posts: 1,748
Likes: 0
im not familiar with manuals, but I would think there is a switch on the clutch pedal, like the switch on the brake pedal. Maybe the switch is bad?
Jun 12, 2005 | 08:12 PM
#3
Registered User
Joined: Mar 2005
Posts: 43
Likes: 0
From: south california
NSS Neutral safety switch is bad m located on the clutch pedal assambly as said in previous post.
Jun 13, 2005 | 06:39 AM
#4
Thread Starter
Contributing Member
Joined: Jul 2004
Posts: 107
Likes: 0
From: Alden, New York, Suburb of Buffalo, NY
Thanks
There is a switch behind the clutch pedal. Looks like a couple of bolts and a wire connection. Any ideas if this is an autozone type part or a stealership only part?
Thx again
There is a switch behind the clutch pedal. Looks like a couple of bolts and a wire connection. Any ideas if this is an autozone type part or a stealership only part?
Thx again
Thread
Thread Starter
Forum
Replies
Last Post
bigblue82
General Electrical & Lighting Related Topics
10
Jul 6, 2015 08:27 AM
Badger62811
86-95 Trucks & 4Runners (Build-Up Section)
0
Jun 26, 2015 09:26 PM
jmc88runner
86-95 Trucks & 4Runners
3
Jun 18, 2015 03:39 PM
