I cannot find the torque specs in the haynes manual on flywheel torque.

also usually the clutch dist will say which direction it should be facing, mine does not... one side is flatt all the way across, and the other side has a raised center just inside the clutch disc. should the raised center face the flywheel or the pressure plate...

here is a bad attemt at a quick diagram

a. flywheel

__----__

pressure plate



b. flywheel

--____--

pressure plate

so option a or b?

 

If you are talking about the hooking the flywheel to the crankshaft I know a 22re is 80 FT/LBS. Not sure about a 3.0 but I would imagine it to be the same. Not sure about the other question. Sorry. http://personal.utulsa.edu/%7Enathan...fsm/index.html Try that fsm.

 

On the clutch disc the flat side toward the flywheel and the torque for flywheel bolts are 65 ft lbs, pressure plate bolts are 14 ft lbs!!!

 

that manual is great!

torque is 65fl/lbs

clutch disc is installed as option "b"

thanks for your help!