I dont have enough money for the rims I want, so Im just going to go ahead and get the new tires.

Im getting 305/70/16 so they are 12.50" wide.

Obviously with the stock wheel setup, I'll have clearance problems with the a-arms.

Right now with my 10.50" tires I have 1" clearance. With the 12.50, I will have 1" added to each side. So, Im thinking I need at least a 1/2" wheel spacer.

I noticed all the bolt on wheel spacers are like $80+ for a pair.


Since this will just be temporary, could I just buy the "slip-on" 1/2" spacers like the ones below, and have no problems?


Or shoudl I go ahead and just buy some 1" bolt on ones? I like the Marlin Crawler ones, but, I cant understand how to order them?!?!? How do I order through marlin?

Thanks in advance

 

Stay away from the slip on spacers-they will cause horrible vibrations from the front end. I ran them for a week and took them off.

 

Im going throgh the same dillema, but on wider rims.

 

Yeah, I was htinking about just getting the more expensive ones I guess.

All I can find are 1.5" spacers. Will those just look silly as hell with the already wide tires of 12.50" ??!!!

Well, I guess that will work until I get my rims.

 

12.50" tires on a 7" wheel is pushing it, if you do it i would recommend to run them at a lower pressure than you normally would to help the tire flatten out and not wear in the middle

 

Good point!!!!

I was wondeirng about that as well.

Thanks for the input.

 

Im gonna try and pick them up all Allprooffroad.com
Or if ym homeboy at 4wheel parts got them.

 

How exactly would this happen with a lugcentric wheel? Your wheel studs moved?

 

Im planning on bolt ons