Length of 2nd gen. 4Runner Body Mount Bolts?
Aug 13, 2004 | 06:08 PM
#2
One option, pul them out and measure, its really easy. No need to jack up or support anything, just put a wrench on top, socket on the bottom, remove the nut and pull the bolt out, measure and re-install. They run from about 3" to 6.5" or so, but some have an outrageous amount of excess length.
Last edited by 4Crawler; Aug 13, 2004 at 06:28 PM.
Aug 13, 2004 | 06:19 PM
#3
Guest
Joined: Jun 2003
Posts: 5,055
Likes: 0
Originally Posted by 4Crawler
One option, pul them out and measure, its really easy. No need to jack up or support anything, just put a wrench on top, socket on the bottom, remove the nut and pull the bolt out, measure and re-install. They run from about 3" to 5.5-6" or so, but some have an outrageous amount of excess length.
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
Jun 1, 2021 01:51 PM
