95.5-2004 Tacomas & 96-2002 4Runners 4th gen pickups and 3rd gen 4Runners

Hard Start 3.0 V6

Thread Tools
 
Search this Thread
 
Old Aug 6, 2004 | 10:09 PM
  #1  
patterson's Avatar
Thread Starter
Registered User
 
Joined: May 2004
Posts: 72
Likes: 0
From: Oregon
Hard Start 3.0 V6

my truck has been having trouble starting
it takes like three tries but it always starts
it cranks but doesnt start right away


this isnt a started thing is it?

what could it be, the timing is on and the timing belt had just been replaced by a shop,
has new coil, ignitor, plug wires, plugs
Reply
Old Aug 6, 2004 | 10:39 PM
  #2  
Sludge's Avatar
Registered User
 
Joined: Jul 2002
Posts: 422
Likes: 0
From: Pittsburgh Pa
try changing the fuel filter
Reply
Old Aug 8, 2004 | 04:34 PM
  #3  
patterson's Avatar
Thread Starter
Registered User
 
Joined: May 2004
Posts: 72
Likes: 0
From: Oregon
it starts pretty easy when cold but when warm its a pita
Reply
Old Aug 8, 2004 | 04:46 PM
  #4  
VolcomTacoma's Avatar
Registered User
 
Joined: Jul 2003
Posts: 409
Likes: 0
My old truck with the 3.0 did this too. When it was cold it would start right up. After driving it would take a few more extra cranks to fire up. It would run fine after it started though. It had a new oem shortblock too, so im not sure what the problem was.
Reply
Old Aug 8, 2004 | 04:48 PM
  #5  
amusement's Avatar
Registered User
 
Joined: Nov 2003
Posts: 1,537
Likes: 0
From: Portland, Oregon
I would consider replacing the EFI relay under the hood and the other relay under the dash left of the heater core. Had that problem with my '95 Yota Hilux pickup 3.0 ... after placing relays no more problem.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
bigjstang
86-95 Trucks & 4Runners
21
Jun 2, 2025 03:56 PM
toyotamonster
3.4 Swaps
7
Apr 16, 2020 06:02 PM
Jdgarrison
86-95 Trucks & 4Runners
1
Oct 1, 2015 05:22 PM
colinmil
Newbie Tech Section
2
Jul 6, 2015 04:03 PM




All times are GMT -8. The time now is 04:49 AM.