Did some searching and did not find what I was looking for. Supposedly there are two cables which attach to the temperature slider in the cabin from what I have read, one to a flapper door and the other to the heater control valve. My flapper door still opens & closes fine but the cable attached to the heater control valve does not actuate the valve.. It moves freely by hand at the heater control valve but not with the slider at all. I was wondering if anybody had any decent diagrams or pictures of how the cable for the heater control valve in the engine compartment attaches to the slider so I know what I'm getting into before I tear into it blindly. The FSM seemed to be kind of vague about it or at least the info I found was.

Thanks