I have a 2003 tacoma prerunner (2.7L) and I want to put a 2JZGTE motor in it. any suggestions on swap kits for this engine or tips?

 

----------

 

Depending on what state you are in you might not get it to pass inspection especially if it's a jdm motor. You can use you existing trans if it's a manual and just put the 2jzge non turbo bellhousing on it and it will bolt up supposedly. everything else custom

 

This is one of those things where if you have to ask you aren't capable of doing this yourself. It's highly custom from top to bottom.