Need a shift bezel for 1st gen 4Runner w/ 5 speed. Prefer gray but I can paint. I would like pictures and measurement of length. I don't need the boot. Need it shipped to 23116. I can PayPal or money order.

 

Bump.

 

I should have one in gray. Unsure what it came out of so I'll have to give you measurements, but it should be the correct era of pickup or 4runner.

EDIT:

I looked up the part number, appears it is from a 84-88 pickup 4x4.

Length end to end on bottom side 17.5 inches
Rear width bottom side 6 inches
Front width bottom side 7 inches
Has small compartment built into the front area.

Let me know if those are close enough to work for you, I can get photos and such.

Part number is 58802-89106, It is gray, and the top shift boots are cracked pretty badly, but the plastic isn't bad.

 

That sounds about right. Can you post a picture? I don't need the boot because I bought a new one on eBay.

 

If its got built in front pocket its from a '85-88 fuel injected 4cyl 4runner/pickup. If it doesnt have a front pocket built in it is from carb 4cyl or v6. Hope that helps

 

Sorry was out of state.

Anyway it does have the pocket. I can remove the shifter boots to save a little weight on shipping.

 

That's what I need! PM me your price shipped to 23116. I prefer to pay via Paypal. I don't want the boot or the metal wire in the boot so that would save some weight.

 

I got the trim out in the mail today. You should have received an email from paypal that included the tracking number, if not shoot me a pm.

 

If you still have the boot and metal ring on the boot, I'll take it. It looks beat up but it'd be perfect for my custom boot project. Please let me know.

thanks!

 

Pmed you.

@Nervo19

You should have the trim pretty soon.

 

I received the bezel yesterday. Excellent condition and excellent packaging. Thank you!

 

Perfect, thanks for the follow up on it .