North Carolina North Carolina Chapter

mikeys87 gets a lift

Thread Tools
 
Search this Thread
 
Old Mar 21, 2004 | 02:35 PM
  #1  
seaflea's Avatar
Thread Starter
Contributing Member
 
Joined: Nov 2003
Posts: 1,571
Likes: 1
From: wilmington nc
mikeys87 gets a lift

this weekend me and mike installed all his new parts.
To include all front ball joints, a-arm bushings, and sway arm bushings. All rubber was replaced with Polyeurathane.
While we were into it we added 26 mm sway a way torsion bars and 2" add a leafs for the rear.

as with any truck of this age we ran into a few "minor" problems. :pat:
Control arm bolt that wouldnt come off (until we took the gas axe to it)
Ball joint that would not separate (until we used a "persuader" AKA 5 lb sledge)
U-bolts that did not fit. They were plenty long enough but not enough thread.
So I had to donate the ones from my runner and use Mikes new ones
So now this job just got a lot longer. My runner takes up a couple of hours to adjust and re-install add a leafs that were previously left out.
So this job that should have taken a day or so to complete has now taken all weekend to do. But the good news is Mikes runner looks great.

Mikes runner is on the right!
Attached Thumbnails mikeys87 gets a lift-but2but.jpg  
Reply
Old Mar 21, 2004 | 02:36 PM
  #2  
seaflea's Avatar
Thread Starter
Contributing Member
 
Joined: Nov 2003
Posts: 1,571
Likes: 1
From: wilmington nc
here is a pic of Mike actually working
Attached Thumbnails mikeys87 gets a lift-mikework.jpg  
Reply
Old Mar 21, 2004 | 02:41 PM
  #3  
seaflea's Avatar
Thread Starter
Contributing Member
 
Joined: Nov 2003
Posts: 1,571
Likes: 1
From: wilmington nc
afrter all has been said and done Mikes runner has gained 1 1/2" in thefront and 3" in the rear ( the rear is expected to sag a bit after it works in so his truck will level out.)
Now its time for a front end alignment and those beautiful new 31s
Reply
Old Mar 21, 2004 | 02:50 PM
  #4  
customcruiser's Avatar
Registered User
 
Joined: Jul 2003
Posts: 675
Likes: 0
From: Race City USA (Mooresville, NC - LKN)
looks good can wait to see in Uwharrie!!

sold my t-bars to another NC member but not 4ROC yet, he just got a 93 Runner and he has a 84 Runner with 36 or 38's hopefully he will be able to make to the 1st event this year.
Reply
Old Mar 21, 2004 | 05:49 PM
  #5  
Mikeys87's Avatar
Registered User
 
Joined: Nov 2003
Posts: 105
Likes: 0
From: Wilmington, NC
Thanks for the help and the write up Will . Also added extended diff breathers after you left. Next weekend is the custom snorkel install and the hopeful new gears and diffs soon after that. This truck is starting to cost me some $$$$$$. Good thing they last for so long between repairs .
Reply
Old Mar 21, 2004 | 07:17 PM
  #6  
customcruiser's Avatar
Registered User
 
Joined: Jul 2003
Posts: 675
Likes: 0
From: Race City USA (Mooresville, NC - LKN)
yea $$$$$$$$$$$ my truck sits 6" higher in the front, i have 4.10's in the rear and 4.88's up front, and no front driveshaft

thats over a grand just so i can go 4wheelin again and then i may need a rear driveshaft after i lift the rear

btw -- did you guys reserve campsites yet?? hot showers sound nice, also as for the drinkin in the campsites i think it is illegal in any national forest to consume the nector of the gods just a little heads up for when the rangers come around
Reply
Old Mar 21, 2004 | 07:48 PM
  #7  
ssbogger's Avatar
Registered User
 
Joined: Feb 2003
Posts: 698
Likes: 0
From: James Island/ChuckTown, SC
about campsites... I went back in october with a few friends and we stayed off of one of the trails i.e. primative camping. I dont know who all is up for this but its probably what im gonna end up doing. I think its alot more fun not having to worrie about neighbors and the ranger. Plus im sure we could use the showers anyways. oh yeh. we avoid the camping fee and reservation too.
Reply
Old Mar 23, 2004 | 09:35 AM
  #8  
turboale's Avatar
Contributing Member
 
Joined: Jun 2002
Posts: 4,868
Likes: 0
From: Brooklyn, NY
Congrats! Looks like you guys were busy over the weekend!

Man, it sucks not having any money...
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Dparr2ndgen
95.5-2004 Tacomas & 96-2002 4Runners
0
Sep 8, 2015 01:06 PM
justdifferentials
Vendors Build-Ups (Build-Up Section)
0
Sep 5, 2015 06:52 PM
joeynational
86-95 Trucks & 4Runners
1
Sep 5, 2015 01:54 PM
matthew138
Newbie Tech Section
0
Sep 3, 2015 08:21 AM
Ryall
86-95 Trucks & 4Runners
2
Sep 2, 2015 06:48 AM




All times are GMT -8. The time now is 03:34 AM.