I just recently bought a Performance Accessories 3" body lift for my 1995 Toyota 4runner with all mounts and brackets I have never put a lift on anything before. Are there any unexpected issues I might run into? I don't want to get into it and open up a can of worms. Any advice, tips, or tricks, I could get would be most graciously appreciated.
Thanks,
Ryan

 

Hey bud never put one of these on before but I've always been told the best thing you can do is start spraying your cab bolts with PB blaster a few days ahead of time.

 

Common things people forget to do when installing a body lift-
-Lowering the radiator and fan shroud
-extending the hose for the gad tank fill
-also double check your wiring, throttle cable etc to make sure nothing is binding.
-some people have issues with the shifter and t/c selector following a body lift..

IMO they are cheap but not worth the effort to put one in...