Notices
86-95 Trucks & 4Runners 2nd/3rd gen pickups, and 1st/2nd gen 4Runners with IFS

1989 3.0 sat long time now acceleration issues

Thread Tools
 
Search this Thread
 
Old Sep 5, 2014 | 06:50 AM
  #1  
chadeppig's Avatar
Thread Starter
Registered User
 
Joined: Sep 2014
Posts: 4
Likes: 0
1989 3.0 sat long time now acceleration issues

Hello everyone im new to the site. I recently got a 1989 extended cab 3.0 and it has sat since 2001!! anyhways i tore the tank out completely cleaned it replaced the fuel pump and changed the oil she started right up. I have now put about 40 miles on it and it has a weird hiccup when you press the gas and will run fine if you dont put a load or demand to much fuel. it wont rev past 4k it just starts sputtering. its a pain to get up to highway speed lugging it under 3k rpm. I dont know much about these efi systems in these 2nd and 3rd gen trucks. any ideas?
Reply
Old Sep 5, 2014 | 07:14 AM
  #2  
JasonYota's Avatar
Registered User
iTrader: (1)
 
Joined: Mar 2013
Posts: 2,121
Likes: 1
From: Mobile, Alabama
Changed the fuel filter? Injectors could be semi clogged.
Reply
Old Sep 5, 2014 | 08:01 AM
  #3  
chadeppig's Avatar
Thread Starter
Registered User
 
Joined: Sep 2014
Posts: 4
Likes: 0
I just got a fuel filter for it this morning and will do. Im betting your right on the money because it had a half inch of solid varnish in the tank and most like the worst gas i have ever smelled in my lide my driveway gravel still smells 2 weeks later lol. But it slowly has started to run worse so that junk in the lines must be clogging it hopefully.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Aleeex_u
86-95 Trucks & 4Runners
10
Jun 5, 2016 06:52 PM
Goddamnboh
3.4 Swaps
12
May 11, 2016 09:22 PM
slacker
Vendors Build-Ups (Build-Up Section)
13
Sep 6, 2015 06:14 AM
Mutinebullfrog
86-95 Trucks & 4Runners
1
Jun 18, 2015 01:36 PM




All times are GMT -8. The time now is 09:19 PM.