Where do i buy lifts an diesel engines and everything i need
Mar 26, 2014 | 03:24 PM
#1
Thread Starter
Registered User
Joined: Feb 2014
Posts: 42
Likes: 0
Where do i buy lifts an diesel engines and everything i need
I'd like a 4bt diesel cummins
A 4 inch lift for the whole truck that comes with everything I need
A straight axle front an rear an
rear lockers
Wheel lockers
I might be missing somthing but all of these need to fit on a 1993 toyota pickup 4x4 xt cab
A 4 inch lift for the whole truck that comes with everything I need
A straight axle front an rear an
rear lockers
Wheel lockers
I might be missing somthing but all of these need to fit on a 1993 toyota pickup 4x4 xt cab
Mar 26, 2014 | 04:00 PM
#2
Registered User
Joined: Oct 2009
Posts: 4,832
Likes: 332
From: Northfield, Vermont
Craigslist.
Type all your questions into google first. The answers are out there. And read the FAQs and stickys in the forums.
Welcome to the forum!
Type all your questions into google first. The answers are out there. And read the FAQs and stickys in the forums.
Welcome to the forum!
Last edited by rattlewagon; Mar 26, 2014 at 04:03 PM.
Mar 26, 2014 | 04:11 PM
#4
Registered User
Joined: Oct 2009
Posts: 4,832
Likes: 332
From: Northfield, Vermont
Mar 26, 2014 | 06:58 PM
#5
Registered User
Joined: Nov 2008
Posts: 2,306
Likes: 8
From: Cheyenne, Wyoming
There is no cookie cutter product or supplier for what you want. The way I see it, you have two options...
1. Take your list and wallet to your favorite "guy" and let it be his problem. You show up and drive off.
2. Break these wants into more manageable sections. Then start one part and finish it to completion. Then repeat on the next section. Yes, this will take require you to use your brain. If it's good, you'll figure it out.
Good luck...
1. Take your list and wallet to your favorite "guy" and let it be his problem. You show up and drive off.
2. Break these wants into more manageable sections. Then start one part and finish it to completion. Then repeat on the next section. Yes, this will take require you to use your brain. If it's good, you'll figure it out.
Good luck...
Trending Topics
Mar 26, 2014 | 10:55 PM
#9
Registered User
Joined: Nov 2009
Posts: 102
Likes: 0
From: Lonestar State
www.tndieselpower.com would be a start it will be a expensive build, most 4bts are around 3500 in a running condition, best bet is to buy a old running step van so you can get all the conversion parts ie trans, intercooler and engine stuff, then you have to swap some heavy duty axles. its a completely custom build. i wanted to do it at one time then looked at the cost. be cool if you can get it done though.
Mar 27, 2014 | 06:52 AM
#11
Registered User
Joined: Apr 2011
Posts: 1,947
Likes: 1
From: Monkton, MD
https://www.yotatech.com/forums/f152/
https://www.yotatech.com/forums/f162/
https://www.yotatech.com/forums/f11/
+the link rattlewagon posted.
Everything else can be found on craigslist or at your local junkyard. The time it took me to find those links was probably the same amount of time it took to create this thread.
Your welcome.
Mar 28, 2014 | 04:35 AM
#12
Thread Starter
Registered User
Joined: Feb 2014
Posts: 42
Likes: 0
Mar 30, 2014 | 06:26 AM
#19
Registered User
Joined: Apr 2011
Posts: 1,947
Likes: 1
From: Monkton, MD
Mar 30, 2014 | 01:51 PM
#20
Registered User
Joined: Oct 2009
Posts: 4,832
Likes: 332
From: Northfield, Vermont
Dont go to pirate, they wont be any help.
Yes jasper engines have a pretty good rep.
Next time before you have a question you want to ask, type it into google first. Google is surprisingly helpful
Yes jasper engines have a pretty good rep.
Next time before you have a question you want to ask, type it into google first. Google is surprisingly helpful
