[IMG][/IMG]

I'm looking everywhere on line including my FSM and I have fail. So here I am asking for your help. The identification that I need help is the 2 plugs circle in RED. These plugs are connected to the body harness located on the PASSENGER kick panel by the ECU and also connected on the engine wiring harness. The GREEN arrows are the plugs for the ECU its self, I believe those are the 10P / 18P and not showing is a 14P from the body harness.

86 T4R 22RE 5-Speed DXL

I would appreciated if anyone can provided a pinout and or diagram for these 2 plugs? I am in the process of doing a 1uz and ran into a halt on these. Thanks guys!

Build Thread: https://www.yotatech.com/forums/f161...se-4x4-269037/

 

anyone?

 

What are you looking for?

 

I wanna say that all the yellow plugs like that go to the computer or air bags but I don't think your runner has air bags

 

I know my 86 don't.

 

Im trying to figure out what I need for this wiring swap. I trace most of it yesterday and it lined up with water temp, oil sender, check engine, 4x4 light, vsv, IG on the diagnostic port and etc.... These are some of the things that correspondes to the cluster and also corresponds to the some of the wiring harness on the 1UZ. Basically, those 2 plugs will be part of the Lexus 1UZ wiring harness when complete.

 

could It be plugs to a fuse block possibly??

 

no not the fuse, its connected to the engine wir harness