brake resevoir plug

Reply Subscribe

Thread Tools

Search this Thread

Mar 15, 2013 | 07:30 PM

toyota32

Thread Starter

Registered User

Joined: Jan 2013

Posts: 45

Likes: 0

brake resevoir plug

hey guys im putting the v6 master and booster on my 86. I noticed there is a plug on the newer brake resevoir thats differnt than the 86. what do you guys do about this plug thanks

Mar 15, 2013 | 10:27 PM

Co_94_PU

Registered User

iTrader: (-1)

Joined: Dec 2012

Posts: 5,433

Likes: 555

From: Colorado

Pretty sure this would be covered in the write up, IIRC thats over on the newbie tech.

Swap the pig tails, or roll your own. Should be the brake fluid warning lamp.

Mar 16, 2013 | 04:02 PM

toyota32

Thread Starter

Registered User

Joined: Jan 2013

Posts: 45

Likes: 0

I looked on the newbie section and couldnt find it so its just cutting the old plug out and wiring in the new plug right

Mar 16, 2013 | 06:23 PM

Co_94_PU

Registered User

iTrader: (-1)

Joined: Dec 2012

Posts: 5,433

Likes: 555

From: Colorado

Here is a less destructive roll your own solution.
https://www.yotatech.com/forums/show...&postcount=194

Take the old connector off the original MC and attach the newer version plug to it. Leaves the original harness intact.