Ok, I have almost finished the swap. 95% of the wiring is done and I have a couple of questions....I searched but didnt find these specifics...

1. On connector II2 from the 3.4 harness, There is a B/W wire that is labeled as clutch switch, I cant find what I am supposed to wire this to.

2. Connector C2 (IH2) from the 3.0 harness, I have plugged in the Black/orange wire to the backup lights, but there are 2 others that state Speed Sensor 2 and Speed Sensor 3, where do these go? I cant find it on my notes...

Thanks for your help.