Ok guys I have a 1980 STD cab 4x4 with alot of mods. (3.8 tubo grand national engine, air locker, 2 in. body, 4 in suspension) and my blinkers and warning flashers have stopped working again. I have had the headlight assembly switch changed 3 times already, (due to headlights staying on) I have finally got another control unit but it was used, and now the blinkers and warning flashers have stopped working. I have no blinker sound. I don't know were the flasher relays are located or what they would look like (small, large etc.) I will try and hook up my old control unit and check the blinkers/ warning lights again. Any other possibilities would be helpful.

 

1. search
2. could be the hazard switch
3. could be the flasher relay
4. look in the factory service manual
5. get a haynes manual
6. search




and welcome to yotatech

 

The flasher is located on the passenger side kick panel. I had lots of problems with my switch too. Bought a brand new one and it solved all of my problems.