Modifying steering lines for 6" DB Lift "HELP!!!"
Apr 21, 2010 | 07:10 AM
#1
Thread Starter
Registered User
Joined: Mar 2009
Posts: 78
Likes: 0
From: Central Va
Modifying steering lines for 6" DB Lift "HELP!!!"
Lots of searching and no good solution yet.
I'm looking at PSC's 16mm inverted flare to JIC#6 hydro adapter fitting. Talked to PSC and they couldn't confirm if thier fitting would work on a Taco rack but it looks like it will.
I just can't be comfortable with bending and kinking my stock lines and that being ok. My very first bend began to crack the high psi line at the hard line to rubber line crimp fitting.
If I could swap to all JIC#6 Hydro lines that would be great but not looking good for a JIC#6 to Taco 16mm banjo bolt (for power steering pump line fitting)
I'm looking at PSC's 16mm inverted flare to JIC#6 hydro adapter fitting. Talked to PSC and they couldn't confirm if thier fitting would work on a Taco rack but it looks like it will.
I just can't be comfortable with bending and kinking my stock lines and that being ok. My very first bend began to crack the high psi line at the hard line to rubber line crimp fitting.
If I could swap to all JIC#6 Hydro lines that would be great but not looking good for a JIC#6 to Taco 16mm banjo bolt (for power steering pump line fitting)
Apr 21, 2010 | 07:10 PM
#2
Registered User
Joined: Apr 2009
Posts: 748
Likes: 2
From: Asheville, NC
https://www.yotatech.com/forums/f129/
may be able to find more in this part called "Off Road Enhancements"
may be able to find more in this part called "Off Road Enhancements"
Thread
Thread Starter
Forum
Replies
Last Post
GreatLakesGuy
The Classifieds GraveYard
8
Sep 4, 2015 09:27 AM
pyramid
86-95 Trucks & 4Runners
10
Jul 30, 2015 10:05 AM
coffey50
Offroad Tech
17
Jul 28, 2015 10:55 AM
terminator
Misc Stuff (Vehicle Related)
3
Jul 27, 2015 07:13 PM
whereAreMyPants
86-95 Trucks & 4Runners
2
Jul 22, 2015 03:32 AM
