One of my front marker lamp housings has a crack and fills with water. May as well as replace with clear corners, so who makes the best? I hate seeing all the cheap ones that look milky and dull after only a year or so.

Another option would be to replace the grille and corner lamps with the "non-chrome" ones from Toyota. Anyone done this? About how much did it cost?

Thanks!
4x4Lamm

 

I had the same issue a few months back. My brush guard went through a corner lens and it started filling with water. I orderd a set of clear corners from ebay for about $50 shipped i think. I like the yellow ones better but I coulndt find them for less than 60-$70 each. Anyways mine still look really clear. Not sure how long that will last though.

What lense did you break? Drivers or Passenger side? I still have a good (Factory)Passenger side one i think. Its the amber that comes stock, and it has the chrome trim (not black). and it is off of a 2004 taco.

Let me know.

 

Thanks for the offer HazMat but I would need a driver side. It's my driver side that is leaking. I took it off once already to dry it out and filled the gap with silicone but it didn't last through the winter. It's the seam between the housing and the lens that is leaking.

4x4Lamm