Aisin Front Manual Hubs in bits.... Help
Oct 25, 2009 | 12:18 AM
#1
Thread Starter
Registered User
Joined: Oct 2009
Posts: 9
Likes: 0
Aisin Front Manual Hubs in bits.... Help
Ive picked up some front wheel locking hubs for me 91 IFS 4runner to change to manual. I got the pair of hubs for $25 as they are in bits. Can someone tell me where some info are to A) check i have all the bits B) work out how to put them back together.
Thanks in advance.
Thanks in advance.
Oct 25, 2009 | 12:38 AM
#2
Registered User
Joined: Dec 2006
Posts: 2,880
Likes: 2
From: Olympia, WA
Check the links to the FSM's here... Links are in a sticky.
Aisin hubs are pretty simple tho, and strong.. easy to work with in other words.
theres a 93 FSM that will have a diagram of the parts.
Aisin hubs are pretty simple tho, and strong.. easy to work with in other words.
theres a 93 FSM that will have a diagram of the parts.
Oct 25, 2009 | 01:04 AM
#3
Registered User
iTrader: (1)
Joined: Apr 2009
Posts: 13,381
Likes: 100
From: I live in New Tripoli Pa out in the woods
Just remember if you are swapping from auto to manual hubs you need the extra hardware from the manual hubs to hold the wheel bearing .
Otherwise they do tend to come loose
This would be the thrust washer the 2 nuts and the lock washer for each side. And of course never seize the cone washers
Good luck
Otherwise they do tend to come loose
This would be the thrust washer the 2 nuts and the lock washer for each side. And of course never seize the cone washers
Good luck
Last edited by wyoming9; Oct 25, 2009 at 01:07 AM. Reason: More information
Oct 25, 2009 | 05:28 AM
#4
Oct 25, 2009 | 05:49 AM
#5
Registered User
Joined: Dec 2007
Posts: 420
Likes: 7
From: Missoula, MT
Going from ADD to Manual is a breeze and you should only need the 2 washers per side. I have mine setup and ready to go. All I'm waiting for is my instructor...he wants to use my manual hubs as a group demo in class. Doesn't bother me though cause we're all going to check my wheel bearings while its apart.
Oct 25, 2009 | 06:32 AM
#6
Just remember if you are swapping from auto to manual hubs you need the extra hardware from the manual hubs to hold the wheel bearing .
Otherwise they do tend to come loose
This would be the thrust washer the 2 nuts and the lock washer for each side. And of course never seize the cone washers
Good luck
Otherwise they do tend to come loose
This would be the thrust washer the 2 nuts and the lock washer for each side. And of course never seize the cone washers
Good luck
AUTO hubs were on Toyota 4x4s came between 1984 and 1989
Going from ADD to Manual is a breeze and you should only need the 2 washers per side. I have mine setup and ready to go. All I'm waiting for is my instructor...he wants to use my manual hubs as a group demo in class. Doesn't bother me though cause we're all going to check my wheel bearings while its apart.
Thread
Thread Starter
Forum
Replies
Last Post
FS[GreatLakes]: Toyota collection part out
88sasturbotoy
Axles - Suspensions - Tires - Wheels
3
Jan 30, 2026 01:57 PM
