need exhaust manifold torq specs please

Reply Subscribe

Thread Tools

Search this Thread

Aug 28, 2008 | 12:09 PM

ThomasTedder

Thread Starter

Registered User

Joined: Feb 2007

Posts: 74

Likes: 0

From: 1986 22RE

need exhaust manifold torq specs please

Does anyone know the torq specs and if there is a particular tightening order?

Aug 29, 2008 | 11:44 AM

Swansen

Registered User

Joined: Jan 2007

Posts: 455

Likes: 0

From: Michigan

oops, i meant to get to this yesterday, but its 33 ft lbs

Aug 29, 2008 | 05:14 PM

Matt16

Registered User

Joined: Oct 2007

Posts: 5,377

Likes: 5

33ft-lbs. There is an order but your fine just tightening the bolts in a bit of a criss-cross pattern. Tighten them to 20ft-lbs, then to 33lbs, use anti-seize.

Aug 30, 2008 | 02:05 PM

ThomasTedder

Thread Starter

Registered User

Joined: Feb 2007

Posts: 74

Likes: 0

From: 1986 22RE

Thanks guys.

Aug 30, 2008 | 02:46 PM

toyota-erik

Registered User

Joined: Jul 2008

Posts: 174

Likes: 0

From: M/V Midland & Biwabik MN

Just tighten it until it starts to strip and back it off 1/4 turn. Then weld them so they never come loose.

Aug 30, 2008 | 04:51 PM

Swansen

Registered User

Joined: Jan 2007

Posts: 455

Likes: 0

From: Michigan

Quote:

Originally Posted by toyota-erik

Just tighten it until it starts to strip and back it off 1/4 turn. Then weld them so they never come loose.

Yes, while your at it, you might as well just weld the head to the block also, that way you'll take care of any possible head gasket leaks....

Sep 2, 2008 | 12:05 PM

ThomasTedder

Thread Starter

Registered User

Joined: Feb 2007

Posts: 74

Likes: 0

From: 1986 22RE

Quote:

Originally Posted by Swansen

Yes, while your at it, you might as well just weld the head to the block also, that way you'll take care of any possible head gasket leaks....

I can't believe I never thought of that.

Reply Subscribe

Related Topics

Thread

Thread Starter

Forum

Replies

Last Post

Missing after warm .Help With codes - 99 4runner 3.4 - codes p1300 p0302 p0300

Jayboy74

95.5-2004 Tacomas & 96-2002 4Runners

Dec 21, 2021 08:27 AM

'84 exhaust header: advice please

Corvoid

84-85 Trucks & 4Runners

Sep 4, 2015 11:55 AM

Very strange noise from Pass Side Floor Board

shrek99352

86-95 Trucks & 4Runners

Aug 31, 2015 04:16 AM