Got my meats on.. They're 33x12.5x15 BFG M/T's on 15x8 Cragar White Steelies with 3.75" backspace.. Looks nice, now I gotta get my lift on and paint thrown on it.. Thanks for helping me figure out what backspacing and lift to get guys! It only rubs when at full lock reversing and hitting a bump in a parking lot, any other time it has NO rubbing at all, I haven't flexed it out but I need to get my lift on otherwise the tire will contact my fender area when flexing..

 

sheesh! do those rub a bit or what?

i have the same size mtr's and mine used to rub with a 3 inch lift until i put a 3 inch bl on.

 

No they don't rub at all unless I'm turning in reverse and hit a big bump.. I took a 10LB sledge to the inner fender/pinch weld..

 

those look good. So is your truck at stock height in those pics?

 

Wern't you the person who said they got some trxus's m'ts?

Looks good

 

Nice I like the combo, what colour you painting the truck?

 

Looks great!!!!!! My all time favorite tire has been the BFG MT I had them on several 3/4 and 1 ton Ford diesels and those damn things wear like iron. With a light weight rig like that they'll last you for years.

So where are the wheeling pics? Can't have deep meats without wheeling pics!!!

 

Yeah I was gonna pick them up the day I found these, and I got these for 450$ with only 20 miles on them, and the Truxus M/T's were like 650$ so I went with the BFG's cause thats what I originally wanted..

 

Krylon Ultra Flat Khaki Rattle Can! I've got ten cans, It should be enough.. when it gets scratched up Im painting it flat black, you have no idea how rusted out that damn bed was, it was so rusted on one of the body lines I had to take the body line out.. And yes its at stock height, in a week or less it will be sportin a 3" Body Lift.. I got the tallest truck on the block now hehe!

 

Awsome tires.

 

i like

 

looks good

 

White steelies??

Thats new. Not bad, though. I love the stuffed-tire look

 

Man i NEED new tires. My decision are between bfg m'ts and trxus's. I think i would like to go with the trxus, but ill see.

If they wear about the same ill go trxus, but like i said we will see.


BTW anyone know if the wear charateristics are similar between the bfg mts and the trxus mt's

 

looks good

 

I like the truck, are you going to put that stock tan back on ??
for some reason i think its a kool color,especially with the black bumpers, well my old truck was that color so i love it.
Sorry bout the thread jack.

Nice Meats !!

 

nice ive always liked those rims it looks great. what kinda lift you gonna get?

 

3 inch body he said

 

I JUST said I will have a THREE INCH BODY LIFT, and Im painting it KRYLON ULTRA FLAT KHAKI.. Haha No point in spending ANY cash on paint because that bed has over a gallon of bondo on it and about six sheets of fiberglass matting on both sides.. its gonna rust again, its a trail rig, and its getting rattle canned.. I like the white rims, everyones got black rims and they're "Murdered Out" or something stupid like that, I guess I'm "Alived Out" Oh and as far as tires go, don't spend the cash on BFG MT's theyre nice, so are the Truxus, but not worth the cash, go to www.summitracing.com and get the MUD KING STEEL RADIAL a 33x12.5x15 is like 138$ and theyre a cross between TSL's and BFG MT's, theyre made by BFG but have altered tread cause they were seconds from the factory, theyre a good long lasting tire IMO..

 

do you need to have a 3.75" backspacing to run 33/12.5's with a 3 in body lift? Or can you do it with stock toyota rims?