specially if you have 1" diff. drop.

thanks.

 

With 1" diff drop

 

sweet trekkmasters.... pretty "unique" color


I wish I had those skids... they look great

 

great!! does your rig have any body lift or suspension lift only.

 

I noticed my diff drop does not allow the middle bolts to go back in their holes with the stock plates...time for an upgrade!

 

Only 3" suspension lift curtesy of Toytec

Since that picture I put the Budbuilt.com sticker on like rick had.

 

Not to steer away the thread too much, but do you get any rubbing with 285s and an all suspension lift?

 

Not after trimming the front fender, some other small plastic spots, and pounding the pinch weld. I have 97 LC wheels which tend to be in the perfect backspace zone.

 

how much are those wheels backspaced? and budbuilt skids cost around 249 if im not mistaken?

 

no BL, 285s, 1"DD

 

Lots of info on the wheels if you search, many people run'em.

The front skid and belly pan are about 250 each or 450 for the set. Shipping was more reasonable than I thought it would be.

Out of respect for the OP,

 

do they bolt right on or do you have to drill mounts

 

In theory they bolt right on. I had to make some hole size & hardware size adjustments on the belly skid, I think Aaron did too.

 

is this piece the belly skid?




the guy i bought from did some cutting so i have to patch up with some 3/16" plates. i'm wondering where it goes on to.