Do the transfercase and the transmission (G58) share oil? Or is there a seal in between?

Thanks

 

Also interested in knowing this.
Impatient Bump

 

Seal

They have separate fill and drain plugs

 

I think there is supposed to be a thin paper barrier between the two... but when I replaced the t-case on my old 87 4Runner I didn't feel like going to the parts house and getting a new paper gasket so I just slopped some liquid gasket on there and I didn't have any problems. I hope that helps a little bit. I could have committed a cardinal sin by doing this but what the heck...

 

buy a service manual!!!!!


that is all.......

 

Thin paper? Try solid aluminum.

All that is on the back of the tranny is a single splined hole that the xcase input shaft goes into. It is sealed from the transfer case.

Assuming, of course, that this is a five speed.

 

Got two, just not the transmission one. Thanks for the helpful thought.

 

Its a 5-speed.

 

you can down load a toyota factory service manual from the FSM link in my signature.....