My 95 has the auto hubs, I hate those things. Went to go to the office yesterday and it felt like the driveline was bound up. Who has the best replacement kit to go to manuals?

Any other suggestions on what it could be? It's the 3.slow with auto tranny. Fluids all appear ok.

Thanks,

Michael

 

Well to clear things up, you have A.D.D, not automatic hubs.

And to swap over, all you need is a set of Aisin Manual hubs, thats it. They are a 100% direct bolt on swap.

Or you can buy a kit and hubs from Warn, but the aisin hubs are stronger.

 

I got a set of aisin manuals off a pickup in a junkyard for 10 bucks a piece. I cleaned and re-greased them myself then installed them. the difference in rolling resistance was very noticeable and my MPG went up a little too. There are some good threads on here covering how it's done. Heres one.

https://www.yotatech.com/forums/f116...ap-add-140474/

 

or a set of warms will work

 

Used Aisins are cheaper and stronger. If you take them apart, clean every surface and install them, its about 2 or 3 hours.

 

x2 on Matt's time estimation.