ok im goin to sandblast my frame tomorow. what is a good primer to put on so the frame will not rust for like 2 days

 

some one

 

POR-15 http://www.por15.com/products.asp?dept=3

 

like just a normal primer plus here in canada is hard to find por 15

 

Try this place
POR-15 Canada

 

I thought that was funny. If you don't want POR15 which is ridiculous because it kicks azz then try rustoleum. But seriously if you went to the trouble of sandblasting the frame, why not get the best product you can to prevent more rust on your frame.

 

Where are you in Ontario ?
I think that place is in Port Perry ........
POR-15 is the best .... Just remember * You get what you pay for *

 

We can only guide, its up to him to heed our advice.

 

This is true ....... Good Luck 4RunnerGuy lets see some Pic's

 

Do a search for "Chassis Saver". This product worked great for me and less expensive

 

Atatoy
That looks like a 91 ?
Where did you get Chassis Saver, in Canada or US. ?
If Canada where?

 

Eastwood Rust Encapsulator followed by Eastwood Chassis Black.

 

i live in near the toronto area. im lookin for somethin good and i looked at there web site its cheap for the por15

 

If you're going to sandblast and remove the rust, you don't need POR, get some metal etching primer.

 

ppg dp90 epoxy primer

 

i might get Chassis Saver it looks to be good its a good price. well im getting it because even if i remove the rust it will stop it from gettin eny rust

 

what is that

 

its an epoxy sealer and its probably cost more than you want to spend 70usd a quart plus 30 for the catalyst.

 

Dude, you gotta wait more than seven minutes before you bump your thread. Give people a chance.

 

is there more people who have use por 15 or Chassis Saver put up some pics so we all can see