3.4 and 3.0 motor parts and more...
#1
3.4 and 3.0 motor parts and more...
Items in green can ship. Shipping charges will need to be added.
Items in orange would require local pickup. Shipping can be discussed but I think would be cost prohibitive due to size or weight.
3.4 Exhaust Manifolds: $40

Great condition. Came from a ’96 3.4, but should be compatible with any Toyota 3.4.
3.4 Exhaust Crossover: $50


Great condition. Came from a ’96 3.4, but should be compatible with any Toyota 3.4. For those doing a 3.4 swap, ORS requires crossover to be sent in for them to use in building their exhaust crossover that will exit to the passenger side.
3.4 Oil Pressure Sender: $15

From a ’96 3.4 motor, but should be compatible with a majority of 3.4’s. Easy to snap off during a stubborn filter change. Pick one up for a spare.
'90 ECM for a V6, 3.0 5spd: $95

Perfect ’90 ECM for a V6 3.0 motor, 5spd transmission. Will most likely work on any 3.0 between ’89 and ’95. Will not work with an auto tranny vehicle.
'90 V6 Transfer Case: $75
Sat behind a ’90 V6 R150 (5spd) tranny. Perfect operating condition. 23 spline throughout.
I can take PayPal or pre-pay money order. Cash or money order will work for local pickup.
Items in orange would require local pickup. Shipping can be discussed but I think would be cost prohibitive due to size or weight.
3.4 Exhaust Manifolds: $40

Great condition. Came from a ’96 3.4, but should be compatible with any Toyota 3.4.
3.4 Exhaust Crossover: $50


Great condition. Came from a ’96 3.4, but should be compatible with any Toyota 3.4. For those doing a 3.4 swap, ORS requires crossover to be sent in for them to use in building their exhaust crossover that will exit to the passenger side.
3.4 Oil Pressure Sender: $15

From a ’96 3.4 motor, but should be compatible with a majority of 3.4’s. Easy to snap off during a stubborn filter change. Pick one up for a spare.
'90 ECM for a V6, 3.0 5spd: $95

Perfect ’90 ECM for a V6 3.0 motor, 5spd transmission. Will most likely work on any 3.0 between ’89 and ’95. Will not work with an auto tranny vehicle.
'90 V6 Transfer Case: $75
Sat behind a ’90 V6 R150 (5spd) tranny. Perfect operating condition. 23 spline throughout.
I can take PayPal or pre-pay money order. Cash or money order will work for local pickup.
Last edited by Elvota; Jan 4, 2008 at 08:53 AM.
#2
Damn thats some good prices. Sorry to hijack but what fan do you use for the 3.4 now? Good luck on the sales im sure youll get rid of that stuff quick
#3
Dangit... I knew I should have started higher.
I used the 3.4 clutch assembly mated to the 3.0 fan. The 3.4 fan I got was shattered, and the 3.0 clutch I had seemd older.
I used the 3.4 clutch assembly mated to the 3.0 fan. The 3.4 fan I got was shattered, and the 3.0 clutch I had seemd older.
#4
Ya prices could have been a bit higher but youll actualy get some money instead of waiting forever to finaly find a buyer for the high prices.
#5
I want the Downey headers can you figure shipping to 56474
Can you send pictures please
Can you send pictures please
Last edited by Bulkhead; Dec 31, 2007 at 08:32 PM.
Thread
Thread Starter
Forum
Replies
Last Post
toyoda8488
84-85 Trucks & 4Runners (Build-Up Section)
2
Jul 5, 2015 10:18 PM




