3.0 to 3.4 swap 94 4runner
Dec 24, 2007 | 08:49 PM
#1
Thread Starter
Registered User
Joined: Nov 2007
Posts: 29
Likes: 0
3.0 to 3.4 swap 94 4runner
has anyone done a 3.0 to a 02 toyota 3.4 swap??wut would u need to buy??everything else i can find out how to do but id like to buy everything i need before i start hacking away..
Dec 25, 2007 | 05:34 AM
#4
Contributing Member
Joined: Nov 2002
Posts: 10,666
Likes: 5
From: Oklahoma State
Here's the 3.4 swap section:
https://www.yotatech.com/forums/f160/
Here's some good info too:
http://www.offroadsolutions.com/technicalarticles.htm
Merry Christmas
https://www.yotatech.com/forums/f160/
Here's some good info too:
http://www.offroadsolutions.com/technicalarticles.htm
Merry Christmas
Last edited by mt_goat; Dec 25, 2007 at 05:36 AM.
Dec 25, 2007 | 04:39 PM
#5
Registered User
Joined: Jun 2006
Posts: 2,243
Likes: 5
From: Calgary, AB
Dec 25, 2007 | 07:20 PM
#6
Registered User
Joined: Jan 2006
Posts: 106
Likes: 0
From: Littleton, CO
If it were me I would prefer the earlier vintage. The 2002 is a drive by wire setup (for some reason they still use a cable to the throttle body assembly though). The throttle body on those years is really expensive compared to earlier. Everything else is covered in the 3.4l swap section located...........
https://www.yotatech.com/forums/f160/ Goat posted earlier
https://www.yotatech.com/forums/f160/ Goat posted earlier
Last edited by thefatkid; Dec 25, 2007 at 07:21 PM.
Thread
Thread Starter
Forum
Replies
Last Post
FS[SouthEast]: Mercury Villager Fan & DCC Fan Controller
coryc85
Misc Stuff (Vehicle Related)
6
Sep 9, 2015 06:24 AM
