3.0 to 3.4 swap 94 4runner
12-24-2007, 08:49 PM
#1
Registered User
Thread Starter
Join Date: Nov 2007
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
3.0 to 3.4 swap 94 4runner
has anyone done a 3.0 to a 02 toyota 3.4 swap??wut would u need to buy??everything else i can find out how to do but id like to buy everything i need before i start hacking away..
12-25-2007, 05:34 AM
#4
Contributing Member
Here's the 3.4 swap section:
https://www.yotatech.com/forums/f160/
Here's some good info too:
http://www.offroadsolutions.com/technicalarticles.htm
Merry Christmas
https://www.yotatech.com/forums/f160/
Here's some good info too:
http://www.offroadsolutions.com/technicalarticles.htm
Merry Christmas
Last edited by mt_goat; 12-25-2007 at 05:36 AM.
12-25-2007, 04:39 PM
#5
Registered User
12-25-2007, 07:20 PM
#6
Registered User
Join Date: Jan 2006
Location: Littleton, CO
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
If it were me I would prefer the earlier vintage. The 2002 is a drive by wire setup (for some reason they still use a cable to the throttle body assembly though). The throttle body on those years is really expensive compared to earlier. Everything else is covered in the 3.4l swap section located...........
https://www.yotatech.com/forums/f160/ Goat posted earlier
https://www.yotatech.com/forums/f160/ Goat posted earlier
Last edited by thefatkid; 12-25-2007 at 07:21 PM.
Thread
Thread Starter
Forum
Replies
Last Post
FS[SouthEast]: Mercury Villager Fan & DCC Fan Controller
coryc85
Misc Stuff (Vehicle Related)
6
09-09-2015 06:24 AM
