i have a 91 4X4 and am about to purchase my lift for it.

i was thinking i'd put on manual hubs at the same time.


what are donor vechicals for this?

years? models? etc....

 

86-95 with manual hubs will work 4runner or pickup

 

so just go to the junkyard and check everything 86-95 looking for manual hubs?

does it have to be a vehical with IFS?

 

yes it does, solid axle hubs have a 30 spline inner gear, ifs hubs have 27 spline

 

anything else to limit it?

or just any 86-95 with IFS and manual hubs?

 

yes, any 86-95 manual hubs will work

 

thanks...

im gonna take a trip to the junkyard this weekend

 

Get the OEM ones (AISIN); avoid aftermarket (Warn).

 

Warn hubs are a really good replacement for the AISIN hubs...

 

ummm....



Its not that the Warn hubs are total junk - but the AISIN hubs are stronger.
And yes - I ran Warn hubs for a long time - because I broke an AISIN (loooong story) and back in 1991 there was no "forum" to tell me to get an AISIN..

 

Well its usually best to stick with OEM parts, but if the OEM parts are too much for ones budget or cannot be found, the Warn is a good replacement!