parting built yota axles... hi-pinion 3rd.... ect...
Nov 29, 2007 | 01:58 PM
#1
Thread Starter
Registered User
Joined: Jul 2003
Posts: 675
Likes: 0
From: Race City USA (Mooresville, NC - LKN)
parting built yota axles... hi-pinion 3rd.... ect...
Decided to part out my Yota Axles
SOLD -- 84 Front Toyota Solid Axle Housing, Factory Trussed, AllPro Truss, Marlin Diff Guard, Knuckles, Warn Hubs, Spindles -- $75 (no birfs, brakes, steering arms, 3rd Member)
SOLD --FJ80 Hi-pinion 8”, 4.88 Gears, Welded -- $500
IFS Calibers -- $25
Extended Stainless Brake lines -- $25
PENDING -- 1.5” Spacers -- $50 (will not sell until 3rd member sells)
FJ80 Rotors -- $25
AllPro Hi-Steer Arms, AllPro Hi-Steer Linkage w/FJ80 rod ends -- $200
SOLD --Factory Asian Hubs -- $50
$750 complete minus birfields
PENDING -- (2) Rear Toyota Axle Housings -- $50
PENDING --Rear Axle Shafts -- $20
SOLD -- V6 3rd 4.88 Gears, Full Spool -- $250
SOLD -- Disc Brakes Kit (brackets, calipers, rotors, soft lines)-- $100
$300
Both Axles $1,000
You pay shipping from 28117
Prices are OBO.
SOLD -- 84 Front Toyota Solid Axle Housing, Factory Trussed, AllPro Truss, Marlin Diff Guard, Knuckles, Warn Hubs, Spindles -- $75 (no birfs, brakes, steering arms, 3rd Member)
SOLD --FJ80 Hi-pinion 8”, 4.88 Gears, Welded -- $500
IFS Calibers -- $25
Extended Stainless Brake lines -- $25
PENDING -- 1.5” Spacers -- $50 (will not sell until 3rd member sells)
FJ80 Rotors -- $25
AllPro Hi-Steer Arms, AllPro Hi-Steer Linkage w/FJ80 rod ends -- $200
SOLD --Factory Asian Hubs -- $50
$750 complete minus birfields
PENDING -- (2) Rear Toyota Axle Housings -- $50
PENDING --Rear Axle Shafts -- $20
SOLD -- V6 3rd 4.88 Gears, Full Spool -- $250
SOLD -- Disc Brakes Kit (brackets, calipers, rotors, soft lines)-- $100
$300
Both Axles $1,000
You pay shipping from 28117
Prices are OBO.
Last edited by customcruiser; Dec 5, 2007 at 08:39 PM.
Nov 29, 2007 | 02:07 PM
#2
Registered User
Joined: Nov 2007
Posts: 3,278
Likes: 2
From: chippawa niagara falls ontario
are those asins fora sfa or will they go on ifs?? also pics
Nov 29, 2007 | 02:10 PM
#3
Registered User
Joined: Jan 2007
Posts: 564
Likes: 3
From: Kingston, WA
well, if he's got them on a solid axle, then they wont fit a ifs, they are different parts
pics? how long was everything used for?
(I'm not buying, but someone else will ask I'm sure)
bump for a good deal
pics? how long was everything used for?
(I'm not buying, but someone else will ask I'm sure)
bump for a good deal
Last edited by b.miller123; Nov 29, 2007 at 02:12 PM.
Nov 29, 2007 | 04:37 PM
#4
Registered User
Joined: Nov 2005
Posts: 155
Likes: 0
price on axle housing shipped to 02871?
Dec 2, 2007 | 07:30 PM
#5
Thread Starter
Registered User
Joined: Jul 2003
Posts: 675
Likes: 0
From: Race City USA (Mooresville, NC - LKN)
Dec 2, 2007 | 08:39 PM
#6
Registered User
Joined: Oct 2007
Posts: 97
Likes: 0
ill send 100 shipped for the disk brake kit to 43950
Dec 3, 2007 | 07:26 AM
#7
Registered User
Joined: Aug 2007
Posts: 205
Likes: 1
From: Tampa
Does the rear axle housing include drum brakes? Shipping to 33615? Thanks!
Trending Topics
Dec 3, 2007 | 12:55 PM
#8
Thread Starter
Registered User
Joined: Jul 2003
Posts: 675
Likes: 0
From: Race City USA (Mooresville, NC - LKN)
Dec 3, 2007 | 01:00 PM
#9
Thread Starter
Registered User
Joined: Jul 2003
Posts: 675
Likes: 0
From: Race City USA (Mooresville, NC - LKN)
there are 2 housings, want both or pics to choose???
not sure on a shipping quote, tried to run one but not sure on the weight
i am at 28117
I will try and figure somgthin out
Dec 3, 2007 | 08:21 PM
#10
Registered User
Joined: Dec 2007
Posts: 3
Likes: 0
From: Gainesville, GA
front axle housing
If you still have it whatd it take shipped to 30506.
Dec 4, 2007 | 07:55 AM
#11
Registered User
Joined: Jan 2007
Posts: 123
Likes: 0
who set up the gears on HP 3rd?
solid crush sleeve?
solid crush sleeve?
Dec 4, 2007 | 03:37 PM
#12
Thread Starter
Registered User
Joined: Jul 2003
Posts: 675
Likes: 0
From: Race City USA (Mooresville, NC - LKN)
Dec 4, 2007 | 03:41 PM
#13
Thread Starter
Registered User
Joined: Jul 2003
Posts: 675
Likes: 0
From: Race City USA (Mooresville, NC - LKN)
Dec 5, 2007 | 05:58 AM
#14
Registered User
Joined: Dec 2007
Posts: 3
Likes: 0
From: Gainesville, GA
Sold!!!!!
Email me or let me know. Im not sure exactly how to go about it but id like to buy the axle housing.
Dec 5, 2007 | 12:25 PM
#15
Thread Starter
Registered User
Joined: Jul 2003
Posts: 675
Likes: 0
From: Race City USA (Mooresville, NC - LKN)
front housing PENDING
Dec 5, 2007 | 12:58 PM
#16
Thread Starter
Registered User
Joined: Jul 2003
Posts: 675
Likes: 0
From: Race City USA (Mooresville, NC - LKN)
Aisin Hubs PENDING
Dec 5, 2007 | 01:00 PM
#17
Thread Starter
Registered User
Joined: Jul 2003
Posts: 675
Likes: 0
From: Race City USA (Mooresville, NC - LKN)
disk brakes still forsale
Dec 5, 2007 | 05:34 PM
#18
Thread Starter
Registered User
Joined: Jul 2003
Posts: 675
Likes: 0
From: Race City USA (Mooresville, NC - LKN)
FJ80 Hi-pinion 8”, 4.88 Gears, Welded -- SOLD
Warn Hubs -- SOLD
V6 3rd 4.88 Gears, Full Spool -- SOLD
Disc Brakes Kit -- SOLD
Rear Axle Shafts -- PENDING
Rear Housing -- PENDING
Factory Asian Hubs -- PENDING
THANKS GUYS
Warn Hubs -- SOLD
V6 3rd 4.88 Gears, Full Spool -- SOLD
Disc Brakes Kit -- SOLD
Rear Axle Shafts -- PENDING
Rear Housing -- PENDING
Factory Asian Hubs -- PENDING
THANKS GUYS
Dec 5, 2007 | 08:36 PM
#19
Thread Starter
Registered User
Joined: Jul 2003
Posts: 675
Likes: 0
From: Race City USA (Mooresville, NC - LKN)
Front Housing -- SOLD
Spacers -- PENDING
Spacers -- PENDING
Last edited by customcruiser; Dec 5, 2007 at 08:41 PM.
Jan 9, 2008 | 07:54 PM
#20
Registered User
Joined: Apr 2007
Posts: 29
Likes: 0
still have the hy-steer?
