parting out 92 4 runner- 3.0 / 5spd, 4.56
Oct 27, 2007 | 11:57 PM
#1
Thread Starter
Registered User
Joined: Apr 2006
Posts: 297
Likes: 0
parting out 92 4 runner- 3.0 / 5spd, 4.56
Blue on Blue, 3.0 / 5spd, 4.56 diffs (G254 code)
Body parts- front fenders, doors (all 4), sunroof, back glass, tailgate all rust free.
Interior parts- truck is a PW/PL/Sunroof setup. All there...
Chassis parts- R150 trans + Tcase, 4.56 open diffs.
Drop me a line of what you need...
Jeff
hartjeff AT comcast DOT net
Body parts- front fenders, doors (all 4), sunroof, back glass, tailgate all rust free.
Interior parts- truck is a PW/PL/Sunroof setup. All there...
Chassis parts- R150 trans + Tcase, 4.56 open diffs.
Drop me a line of what you need...
Jeff
hartjeff AT comcast DOT net
Last edited by 89934runr; Nov 23, 2007 at 08:01 PM.
Oct 28, 2007 | 07:57 AM
#2
Registered User
Joined: Oct 2006
Posts: 209
Likes: 0
From: Rochester, MI
Where are you located? I'm possibly interested in the tailgate and power antenna assembly w/ motor and relay, if it has one.
Oct 28, 2007 | 09:35 AM
#3
Registered User
Joined: Apr 2007
Posts: 191
Likes: 0
From: newnan, georgia
how much for the tranny t-case ecu everything needed to swap out my auto for your 5 speed, you know pedal, ect...and whereare you located?
Last edited by geTBeNt2NIghT; Oct 28, 2007 at 09:36 AM.
Oct 28, 2007 | 11:33 AM
#4
Thread Starter
Registered User
Joined: Apr 2006
Posts: 297
Likes: 0
Oooops- sorry fellas... All parts are in NE FL (Jacksonville area).
Let me get the tailgate off first- right now the window doesn't come down, but I haven't had time to troubleshoot it.
For the auto-manual swap, I'm thingking $500 for trans, Tcase, pedals, shifter boot & trim, etc. I know exactly what you need- cuz I just did two of these swaps (dammit). Hell- I'll even pull off the hydraulic lines and brackets, etc for ya!
Let me get the tailgate off first- right now the window doesn't come down, but I haven't had time to troubleshoot it.
For the auto-manual swap, I'm thingking $500 for trans, Tcase, pedals, shifter boot & trim, etc. I know exactly what you need- cuz I just did two of these swaps (dammit). Hell- I'll even pull off the hydraulic lines and brackets, etc for ya!
Oct 28, 2007 | 04:53 PM
#5
Registered User
Joined: Jan 2007
Posts: 21
Likes: 0
edit......
Last edited by 67on44s; Oct 28, 2007 at 04:55 PM.
Oct 29, 2007 | 07:29 AM
#6
Registered User
Joined: Nov 2005
Posts: 98
Likes: 0
From: S. Indiana
Do you happen to have the twist on style front turn signal sockets? I need the plugins and a small section of the harness.
Oct 29, 2007 | 05:16 PM
#7
Thread Starter
Registered User
Joined: Apr 2006
Posts: 297
Likes: 0
Mizombie-
I'll check tomorrow.
I'll check tomorrow.
Trending Topics
Oct 30, 2007 | 09:45 AM
#8
Contributing Member
Joined: Jun 2006
Posts: 156
Likes: 0
From: Bountiful, UT
I need a couple areas of the lower rear body, on the sides near the bumper. would you be willing to cut out the pieces i need and mail them to me? email me at radfords@gmail.com
Oct 30, 2007 | 10:39 AM
#9
Thread Starter
Registered User
Joined: Apr 2006
Posts: 297
Likes: 0
Send me a pic of what you need- the toplip of the rear quarters are rusty, but that's the only area that is messed up- the rest of the truck is/was cherry! (dammit).
For the guy who wanted the manual conversion- drop me a line if you want to make a deal.
For the guy who wanted the manual conversion- drop me a line if you want to make a deal.
Oct 30, 2007 | 07:55 PM
#10
Contributing Member
Joined: Apr 2006
Posts: 988
Likes: 0
From: Vacaville,California
I need sunroof glass.
What do you need for it and do you think it can make it to 95688 safety?
What do you need for it and do you think it can make it to 95688 safety?
Oct 31, 2007 | 06:37 AM
#11
Registered User
Joined: Feb 2006
Posts: 517
Likes: 1
how much for everything needed to convert my manual windows to power windows? harness buttons...everything...shipped to 02809
Nov 3, 2007 | 10:29 PM
#12
Thread Starter
Registered User
Joined: Apr 2006
Posts: 297
Likes: 0
Sorry for not updating this guys- we had a family emergency; I'm pulling the truck over to my shop tomorrow. I'll PM you guys w/ answers when I get back from work...
JEFF
JEFF
Nov 6, 2007 | 09:53 PM
#13
Thread Starter
Registered User
Joined: Apr 2006
Posts: 297
Likes: 0
update
If you guys are still looking for this stuff- drop me a PM please
Will- tailgate was tweaked w/ a crowbar or something, and the ONLY rust on the truck is right where you outlined in your pics. Sorry man!
Reggie-Sunroof glass- $100 shipped to that ZIP.
89red4x4yota-Power window conversion stuff- ALL of it, 4 doors worth- $200+ shipping; hell- that's why I bought the truck, so I'd have spares!
Mizombie- I forgot to check the sockets... I'll check tomorrow.
ANYBODY ELSE NEED ANYTHING? SHE'S GOTTA GO SOON!
Will- tailgate was tweaked w/ a crowbar or something, and the ONLY rust on the truck is right where you outlined in your pics. Sorry man!
Reggie-Sunroof glass- $100 shipped to that ZIP.
89red4x4yota-Power window conversion stuff- ALL of it, 4 doors worth- $200+ shipping; hell- that's why I bought the truck, so I'd have spares!
Mizombie- I forgot to check the sockets... I'll check tomorrow.
ANYBODY ELSE NEED ANYTHING? SHE'S GOTTA GO SOON!
Nov 7, 2007 | 03:51 AM
#14
Registered User
Joined: Nov 2006
Posts: 101
Likes: 0
From: Charlotte, NC
PMing you Re: some parts I need
Nov 12, 2007 | 05:33 PM
#15
Registered User
Joined: Nov 2007
Posts: 24
Likes: 0
Egr
HELLO LOOKING FOR THE EGR AND EGR PIPE..Body parts- front fenders, doors (all 4), sunroof, back glass, tailgate all rust free.
Interior parts- truck is a PW/PL/Sunroof setup. All there...
Chassis parts- R150 trans + Tcase, 4.56 open diffs.
Drop me a line of what you need...
Jeff
hartjeff AT comcast DOT net[/QUOTE]
Nov 13, 2007 | 07:52 PM
#16
Registered User
Joined: Aug 2004
Posts: 89
Likes: 2
From: Birmingham, AL
I need some metal clips that hold the chrome fender/wheel well trim onto the truck. Do you still have the fender trim to be able to get the clips off? I can send you a picture of what it is I need if you think you may have it.
Nov 14, 2007 | 08:50 AM
#17
Contributing Member
Joined: Feb 2007
Posts: 9,055
Likes: 10
From: maple ridge, British Columbia, Canada
Need the rear ABS sensor that plugs into the 3rd member.
Nov 15, 2007 | 06:23 PM
#18
Registered User
Joined: Apr 2005
Posts: 299
Likes: 0
From: Fayetteville, Arkansas
pm sent
Nov 15, 2007 | 07:00 PM
#19
Thread Starter
Registered User
Joined: Apr 2006
Posts: 297
Likes: 0
CHIBA- I responded to ya (check your PMs); how much of the EGR and pipe do you need? All I have left is the IFS 4.56, the rear was sold.
chroad- I'll check on the clips... I think they are there. Send me the pics if you have them...
JAY- $10 plus shipping from 32003.
soarerjzz30- PM replied to.
chroad- I'll check on the clips... I think they are there. Send me the pics if you have them...
JAY- $10 plus shipping from 32003.
soarerjzz30- PM replied to.
Nov 15, 2007 | 07:37 PM
#20
Registered User
Joined: Jul 2006
Posts: 844
Likes: 0
From: Halifax, NS, Canada
to the OP, how much for the passenger fender and marker light?
