Partin Out 1984 4x4
Oct 21, 2007 | 01:53 PM
#1
Thread Starter
Contributing Member
Joined: Oct 2007
Posts: 78
Likes: 0
From: Fort Collins, CO
Partin Out 1984 4x4
I have an 84' 4x4 I bought from a buddy. I have a 93' that I plan to SAS in the next couple months 
. The only thing I needed from the 84 is the axle. So I am parting out the rest of the truck. 
It doesn't have the body or any of the interior parts. I will post some picks when the crappy weather lifts.
Here is a breakdown of whats available:
($200 w/o carb, $275 w/carb) 22R mileage unknown, the engine should run it was running a few months ago when the body was removed.
5 speed trans ($200)
Forward shift T-case ($150)
Front and rear springs ($25/pair)
I have the factory wiring harness condition fair, may need some repair.
Parking brake lever
If there is anything else you need let me know and I will see if I have it
Prices are pretty negotiable, bounce a number off me and see if it sticks!
. The only thing I needed from the 84 is the axle. So I am parting out the rest of the truck. It doesn't have the body or any of the interior parts. I will post some picks when the crappy weather lifts. Here is a breakdown of whats available:
($200 w/o carb, $275 w/carb) 22R mileage unknown, the engine should run it was running a few months ago when the body was removed.
5 speed trans ($200)
Forward shift T-case ($150)
Front and rear springs ($25/pair)
I have the factory wiring harness condition fair, may need some repair.
Parking brake lever
If there is anything else you need let me know and I will see if I have it
Prices are pretty negotiable, bounce a number off me and see if it sticks!
Last edited by Prophet_MX; Oct 29, 2007 at 09:08 PM.
Oct 21, 2007 | 04:23 PM
#2
Thread Starter
Contributing Member
Joined: Oct 2007
Posts: 78
Likes: 0
From: Fort Collins, CO
More pics
here's some more pics
Oct 23, 2007 | 02:59 PM
#3
Registered User
Joined: Oct 2007
Posts: 13
Likes: 0
From: Sac CA
Will you ship? How much for the T case
Im in north carolina.
Oct 23, 2007 | 08:07 PM
#4
Thread Starter
Contributing Member
Joined: Oct 2007
Posts: 78
Likes: 0
From: Fort Collins, CO
I will ship anything small enought to go UPS, I would prefer not to do freight. This weekend I plan on draining and pulling the Transmission and T-Case and weighing them. If they are under 150 lbs. (max weight for UPS) I will be glad to pack and ship. I will also part out the engine if anyone is interested. It would be easier to ship parts than the complete engine. If anyone wants to pay freight I will palletize it and pack it well ( I use to manage a warehouse that shipped only freight!).
Oct 25, 2007 | 09:51 PM
#5
Registered User
Joined: Oct 2007
Posts: 3
Likes: 0
From: Central California
how much for the engine
Oct 26, 2007 | 12:59 PM
#6
Thread Starter
Contributing Member
Joined: Oct 2007
Posts: 78
Likes: 0
From: Fort Collins, CO
I would let the engine go for 250 w/o the carb 300 with the carb.
Oct 29, 2007 | 08:57 PM
#7
Thread Starter
Contributing Member
Joined: Oct 2007
Posts: 78
Likes: 0
From: Fort Collins, CO
I need these parts gone! make me a reasonable offer! I would prefer not to deal with shipping any of the big stuff.
Trending Topics
Oct 30, 2007 | 12:51 PM
#8
Registered User
Joined: Jan 2007
Posts: 2,801
Likes: 2
From: milwaukee, WI baby muddin in the streets!!
i need a crank if it will work in a 22re and the cont rods and pistons if they fit in the 22re pm me you need it gone and i need it here asap
Oct 30, 2007 | 09:00 PM
#9
Thread Starter
Contributing Member
Joined: Oct 2007
Posts: 78
Likes: 0
From: Fort Collins, CO
I honestly do not know if those internal parts will work. I would assume yes but I can't say for sure. If you want them for sure let me know and I'll see what I can do about getting em to you.
Nov 1, 2007 | 07:08 PM
#10
Registered User
Joined: Jan 2007
Posts: 25
Likes: 1
From: San Antonio, TX
Can you tell me what tranny it is? I need one for my 88.
Nov 1, 2007 | 10:43 PM
#11
Thread Starter
Contributing Member
Joined: Oct 2007
Posts: 78
Likes: 0
From: Fort Collins, CO
I don't know what tranny it is, if you can tell me how ti ID it properly I will be glad to do it.
Nov 5, 2007 | 07:27 PM
#12
Registered User
Joined: Aug 2007
Posts: 6
Likes: 0
From: altavista,Va
hey still got the rear drive shaft?
Nov 7, 2007 | 07:33 PM
#13
Thread Starter
Contributing Member
Joined: Oct 2007
Posts: 78
Likes: 0
From: Fort Collins, CO
Nov 19, 2007 | 07:02 AM
#14
Registered User
Joined: May 2006
Posts: 4
Likes: 0
From: Colorado Springs, CO
Still have the engine?
Nov 19, 2007 | 07:52 AM
#15
Thread Starter
Contributing Member
Joined: Oct 2007
Posts: 78
Likes: 0
From: Fort Collins, CO
Yes I do still have the engine.
Nov 23, 2007 | 04:07 PM
#16
Registered User
Joined: Apr 2007
Posts: 3
Likes: 0
From: Germantown, Il
I am interested in both drive shafts if you still have them. $100 plus shipping to 62245.
Nov 23, 2007 | 04:53 PM
#17
Registered User
Joined: Dec 2006
Posts: 112
Likes: 0
From: Southern California
How much for both or just the leftside bumpstops on the rear axle? Shipped to 90266 (in LA)
Thread
Thread Starter
Forum
Replies
Last Post
defrag4
Vehicles - Trailers (Complete)
0
Jul 31, 2015 10:50 AM
PopsDad1
General Electrical & Lighting Related Topics
0
Jul 30, 2015 02:21 PM
