Bushwacker cutout flares 84-89 4runner
Oct 20, 2007 | 02:51 PM
#1
Thread Starter
Registered User
Joined: Jun 2005
Posts: 78
Likes: 0
Bushwacker cutout flares 84-89 4runner
New Price: $230.00 shipped!
I removed these from my truck after the SAS. I Linexed the bottom half and it is strictly trail only truck. Worked great when on the vehicle of keeping mud off the truck. Looked good to. I have the welt that goes between the body and the flare as well as the rivet caps. I don't know how well the caps will go back on after having been removed. Might want to just purchase new ones. Minimal cutting on the front fender is all that is needed to install. The flares do have some scratches from brush when on the trail. Can hardly notice when cleaned up. Some plastic polish would probably restore them to new condition. The flares in the front were cut on the inside to prevent the tire from rubbing. Can not see when installed. Price some new ones and you will see. Will go to Ebay after this if no one is interested. Feel free to ask any questions.
Thanks
Look at the flare for the passenger side and you can see the piece that is missing. I would cut the flare on the other side the same way before installing:
I removed these from my truck after the SAS. I Linexed the bottom half and it is strictly trail only truck. Worked great when on the vehicle of keeping mud off the truck. Looked good to. I have the welt that goes between the body and the flare as well as the rivet caps. I don't know how well the caps will go back on after having been removed. Might want to just purchase new ones. Minimal cutting on the front fender is all that is needed to install. The flares do have some scratches from brush when on the trail. Can hardly notice when cleaned up. Some plastic polish would probably restore them to new condition. The flares in the front were cut on the inside to prevent the tire from rubbing. Can not see when installed. Price some new ones and you will see. Will go to Ebay after this if no one is interested. Feel free to ask any questions.
Thanks
Look at the flare for the passenger side and you can see the piece that is missing. I would cut the flare on the other side the same way before installing:
Last edited by akarocket; Oct 24, 2007 at 03:55 PM.
Oct 22, 2007 | 01:48 PM
#2
Registered User
Joined: Sep 2006
Posts: 1,801
Likes: 0
From: Good 'ole Georgia
if you still have these in 3 months let me know.
Oct 22, 2007 | 02:29 PM
#3
Registered User
Joined: Mar 2007
Posts: 107
Likes: 0
From: Rossland, BC, Canada
PM sent.
Oct 22, 2007 | 09:48 PM
#4
Contributing Member
Joined: Sep 2007
Posts: 149
Likes: 1
Interested! Where are you located?
Oct 24, 2007 | 03:56 PM
#6
Thread Starter
Registered User
Joined: Jun 2005
Posts: 78
Likes: 0
NEW PRICE!
Oct 27, 2007 | 07:10 AM
#7
Thread Starter
Registered User
Joined: Jun 2005
Posts: 78
Likes: 0
PM's sent
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Flying91
86-95 Trucks & 4Runners (Build-Up Section)
45
Apr 11, 2024 04:39 PM
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
Jun 1, 2021 01:51 PM
BeMiceElf
Misc Stuff (Vehicle Related)
7
Oct 10, 2015 09:40 PM
GreatLakesGuy
The Classifieds GraveYard
8
Sep 4, 2015 09:27 AM
