i recently purchased an 85 pickup for spare parts and i've taken what i needed from it. i still have both axles,including a solid front axle and a good 22re core that siezed from sitting for 2 yrs as well as other miscellaneous parts. the transmission and most of the electrical stuff are gone but everything else must go.

 

What do you want for the core RE? Also, do you have the Xfer case and D shafts? What about sterring knuckles and hubs? Let me know what you got and what you want for it.

 

do you have the power window relay that is mounted on the underside of the steering column?

 

200 (neg) for the core, the transfer case was taken with the transmission, but i still have both driveshafts. It has all the steering for a solid front axle and manual locking hubs for the axle. i know the axle is fine, i'm not too sure about the hubs that are actually on the truck, but i have an extra set from an ifs setup if they're the same, 50 for them. i can arrange shipping for both, but u'd have to pay that as well.

i'm not sure about the relay, it does have power windows but i'd have to check on the relay still being there, i'll get back to you tom (i'm pretty sure it's still there, just want to be positive)

 

manual hubs?

 

50 plus shippin for the hubs, went through them around easter and regreased them. yes they are manual locking aisin's.

 

interested in the complete knuckle with hub

 

I am in Raleigh Nc and interested in the axle from hub to hub

 

Did this stuff sell?

 

do you still have the axles do the front and rear gears match how much shiped to 85225?

 

I Was Wondering If You Had The Shifter For The Trans (5-sp)

Thanks

Tim

 

Im from hickory N.C with a project email me with a list of what you have left if you would may be we can do some deals thanks Greg
gregsmyre21@yahoo.com