95.5-2004 Tacomas & 96-2002 4Runners 4th gen pickups and 3rd gen 4Runners

Heavy Duty Radiator for 97 4Runner

Thread Tools
 
Search this Thread
 
Old Aug 10, 2007 | 10:41 PM
  #1  
97T4RNR's Avatar
Thread Starter
Registered User
 
Joined: Sep 2004
Posts: 187
Likes: 0
From: WV
Heavy Duty Radiator for 97 4Runner

Has anyone heard of a heavy duty radiator available for the 3rd generation 4Runner?

I have looked all over the the internet and even checked with a couple of places that were referenced by other vender's. No luck yet.

I have been pulling a camper that is within my limits, but the engine still runs hot and sometimes I have to pull to the side of the road to let her cool down.

Just had the service done about 10000 miles ago with a radiator flush and new coolant. Installed a transmission cooler after purchasing the camper.

Thanks for any input.
Reply
Old Aug 11, 2007 | 03:02 AM
  #2  
QSVeilside's Avatar
Registered User
 
Joined: Sep 2003
Posts: 378
Likes: 0
Do you have a fan shroud? If not, I would invest in one. I've also heard mixed things about Redline water wetter. Tried it before in my old ride but didn't notice a difference.

www.lcengineering.com has a heavy duty fully aluminum radiator including end tanks. That might be the way to go if you continue to have problems.
Reply
Old Aug 11, 2007 | 06:26 AM
  #3  
CJM's Avatar
CJM
Registered User
 
Joined: Aug 2006
Posts: 4,940
Likes: 2
From: Central NJ
Well trans cooler is also a good idea..

Look for and see if a T100 radiator will fit, they are much larger and actually a GM part!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Road Bull
86-95 Trucks & 4Runners
23
Oct 10, 2015 04:55 PM
Poncho0206
95.5-2004 Tacomas & 96-2002 4Runners
3
Jul 10, 2015 06:21 PM
horunner1x
86-95 Trucks & 4Runners
10
Jul 10, 2015 06:33 AM
Avenged
95.5-2004 Tacomas & 96-2002 4Runners
4
Jul 9, 2015 07:55 AM
Nickdigg
86-95 Trucks & 4Runners
1
Jul 7, 2015 06:04 AM




All times are GMT -8. The time now is 02:23 AM.