So the PP 1" are on back order for close to forever, so once again I am at a starting point of a big decision. I know once I buy the tires there will not be any turning back unless I want to throw money away. So I have one more request to help me with this decision.

I have seen gerdo's beautiful 4Runner running on TRD Tundra Coils up front and OME 890's in the rear with stock sized 265/70/16, but is there anyone with that similar set-up using 265/75/16 or similar sized tires. I really appreciate everyone's help as I am putting a lot of effort into beautifying my own 200k plus 97 4Runner SR5.

Thanks.

 

Here's a pic of mine with 265/75-16's and the tundra's up front and OME 890's in back.

 

Here's mine. I have only the coils, not the topout spacer from Steve at SonoranSteel. Tundra TRD 4x4 Coils (YY, BY) and OME 890's with 265/75/16 TerraGrapplers.

PICS:





Hope this helps!

 

Both you guys have nicely done 4Runners......you also seem to have similar tastes in color. I am sure you guys know what I am going through with indecision on suspension/tire setup. Thanks guys.

 

There are plenty of guys running this setup currently...or at least did before they increased their tire size. Check out the 3rd gen profiles here: 3rd Gen Profiles and you might find some more pictures.

I'm sure a lot of guys still have pics there showing before and after and current shots.

I'm running 70s w/ the tundra/ome lift, but plan on going to 75s soon.

EDIT: Paddlenbikes is one person that comes to mind with photos of the tundra lift and 75s: https://www.yotatech.com/forums/f79/...profile-77088/

 

I will get some pictures tomorrow. Although not the springs/shock setup you are inquiring about but see my sig. I have Goodyear mtrs on 265/75/16's on and I love the look now that everything is final. Well, not including custom front and rear bumpers and rock sliders

 

Here's mine with 285/75/16. And no they don't rub. Not even a little bit!