My 89 4runner
#1
My 89 4runner
got it saturday, havent done anything to it yet, ive got some super swamper LTBs in the garage waiting to go on, the leaf springs are flat, and being held up by the overload leaf so im goin to get a set from the salvage yard for cheap until i decide to lift it. for comparison, my daughters new toy is in the pics(just to make my runner look bigger) and i am not the guy in the pics, thats my buddy ed


















#6
yeah im on XOC, and ClubXterra, ive done some serious wheeling in my X, im jealous of your locker mr 80 more hp than me. have you wheeled that OR?
i can get some pics of the snorkel its juat pvc pipe, 2 90 degree elbows one in the fender, and one on top the cab, i guess it was just heated and bent, other than the obvious, the exhaust was cut off right behind the cat, this is what im learning to weld on, i got a muffler off a 95, and some extra pipe, my goal in the next 2 weeks is to successfully weld this muffler and pipe on before i go camping/wheeling memorial weekend
i can get some pics of the snorkel its juat pvc pipe, 2 90 degree elbows one in the fender, and one on top the cab, i guess it was just heated and bent, other than the obvious, the exhaust was cut off right behind the cat, this is what im learning to weld on, i got a muffler off a 95, and some extra pipe, my goal in the next 2 weeks is to successfully weld this muffler and pipe on before i go camping/wheeling memorial weekend
#7
Trending Topics
#10

No but here is another pic, and how i did it . . .
Used 2 1/4in pvc and heated it to get it to bend. Kind of an art, heat it too much and it wants to collapse. Then used door edge molding to cover up where I cut through the fender. The PVC takes a 45 deg turn inside the fender into the side of the airbox.
Last edited by 95SlowRunner; May 13, 2007 at 07:35 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Flying91
86-95 Trucks & 4Runners (Build-Up Section)
45
Apr 11, 2024 04:39 PM
BeMiceElf
Misc Stuff (Vehicle Related)
7
Oct 10, 2015 09:40 PM




