Misc interior parts from my 1989 SR5 4Run
#1
Thread Starter
Registered User
Joined: Sep 2002
Posts: 498
Likes: 0
From: Littleton, CO
Misc interior parts from my 1989 SR5 4Run
My truck was recently totaled and I snagged what I could off of it. I figured I would post here and see if anyone would want/need any of it. I DO NOT have the truck in my possession, this is all I could get before the insurance company hauled it off...
I had or bought all of this stuff for a 1989 SR5 V6 3.0.
Shipping cost will be handled by buyer.
Zip Code of Location: 80127 (Littleton CO)
Here is my ebay acct for reference:
http://myworld.ebay.com/rkarc/
STILL AVAILABLE
Husky Liner floor mats - driver side corner cut out to fit around foot rest - perfect condition:
Floor Mats
Original 1989 Alloy wheels - in good shape:
Alloy Wheels
Repair Manual/5 Brand New Oil Filters/Hardly used K&N filter Oil and Cleaner (just bought)
Repair Manual/Oil Filters/K&N
Covers for rear compartments/front door map pockets/Sunroof blocker thingy. I could never get that sunroof thing to fit so I'm not sure whats up with that thing. Maybe somebody knows and could use it. The map pockets where taken off to make room for my custom speakers on the front doors.
Misc interior parts
Modified center armrest. This was my proudest achievement! Its simply very dense foam with fabric I bought, wrapped it, and screwed it back on. It has the original bottom piece on it so all you have to do is screw it on and your good to go. I liked it because the resting height of my arm was in perfect alignment to the shifter plus its comfy
. If you don't like the black fabric, simply take the screws off, unwind the fabric, go buy your choice of fabric, cut it to the same dimensions as what I did, reattach and your good to go!
View 1
View 2
View 3
Custom Stereo Install. I had this install done about 2 years ago. Its in perfect condition. All of it is made of wood, except the sub enclosure, thats fiberglass. You can see pics of it at the bottom of this post what it looked like when it was installed. The seperates up front did require drilling in the door panels. Most of the boards attached using screws into metal. I was extremely happy with the setup and the carpet matched perfectly. I had it 4wheelin several times and no squeaks - rock solid. I would like to sell this altogether. The door to the jack was custom too, nothing fancy though.
Custom Install panels
Closeup of the Subwoofer Enclosure
STUFF THAT IS SOLD:
Shade
Light 1
Tools
Gasket for rear topper
Seat Covers
Fender Pic 1
Fender Pic 2
Alpine Stereo with Remote
MISC PICS OF MY TRUCK:





I had or bought all of this stuff for a 1989 SR5 V6 3.0.
Shipping cost will be handled by buyer.
Zip Code of Location: 80127 (Littleton CO)
Here is my ebay acct for reference:
http://myworld.ebay.com/rkarc/
STILL AVAILABLE
Husky Liner floor mats - driver side corner cut out to fit around foot rest - perfect condition:
Floor Mats
Original 1989 Alloy wheels - in good shape:
Alloy Wheels
Repair Manual/5 Brand New Oil Filters/Hardly used K&N filter Oil and Cleaner (just bought)
Repair Manual/Oil Filters/K&N
Covers for rear compartments/front door map pockets/Sunroof blocker thingy. I could never get that sunroof thing to fit so I'm not sure whats up with that thing. Maybe somebody knows and could use it. The map pockets where taken off to make room for my custom speakers on the front doors.
Misc interior parts
Modified center armrest. This was my proudest achievement! Its simply very dense foam with fabric I bought, wrapped it, and screwed it back on. It has the original bottom piece on it so all you have to do is screw it on and your good to go. I liked it because the resting height of my arm was in perfect alignment to the shifter plus its comfy
. If you don't like the black fabric, simply take the screws off, unwind the fabric, go buy your choice of fabric, cut it to the same dimensions as what I did, reattach and your good to go!View 1
View 2
View 3
Custom Stereo Install. I had this install done about 2 years ago. Its in perfect condition. All of it is made of wood, except the sub enclosure, thats fiberglass. You can see pics of it at the bottom of this post what it looked like when it was installed. The seperates up front did require drilling in the door panels. Most of the boards attached using screws into metal. I was extremely happy with the setup and the carpet matched perfectly. I had it 4wheelin several times and no squeaks - rock solid. I would like to sell this altogether. The door to the jack was custom too, nothing fancy though.
Custom Install panels
Closeup of the Subwoofer Enclosure
STUFF THAT IS SOLD:
Shade
Light 1
Tools
Gasket for rear topper
Seat Covers
Fender Pic 1
Fender Pic 2
Alpine Stereo with Remote
MISC PICS OF MY TRUCK:

Last edited by 89-4run; Apr 8, 2007 at 11:49 AM.
#2
Please e-mail me on the Subwoofer enclosure....
jcbnaz (at) cox.net
John
jcbnaz (at) cox.net
John
Last edited by LUV24BY; Mar 24, 2007 at 04:21 PM.
#3
Thread Starter
Registered User
Joined: Sep 2002
Posts: 498
Likes: 0
From: Littleton, CO
luv - email sent.
#5
Send you a pm give me a call please. Interested in several items, I live in Littleton too so shipping is not an issue.
#6
So, it?s only the liner that has no pics? Does it looks like this Husky Liner?... Your car looks nice, especially the dog with it.
You must?ve maintained it very well.
You must?ve maintained it very well.
#7
Thread Starter
Registered User
Joined: Sep 2002
Posts: 498
Likes: 0
From: Littleton, CO
Thanks 
These are the Husky Liners I have for driver and passenger side (black):
Husky Liners
I did take some pics of them, just need to upload them... pm if interested.

These are the Husky Liners I have for driver and passenger side (black):
Husky Liners
I did take some pics of them, just need to upload them... pm if interested.
So, it?s only the liner that has no pics? Does it looks like this Husky Liner?... Your car looks nice, especially the dog with it.
You must?ve maintained it very well.
You must?ve maintained it very well.Trending Topics
#8
Oh! Nice choice! Actually, my friend is the one looking for a car so I still need to show him this thread. I'll just tell him to PM you in case he'd like that.
#9
Thread Starter
Registered User
Joined: Sep 2002
Posts: 498
Likes: 0
From: Littleton, CO
Updated with pics of Husky Floor Mats and Bushwacker Fender Flares:
Bushwhacker Fender Flares:
Fender Pic 1
Fender Pic 2
Husky Liner floor mats - driver side corner cut out to fit around foot rest - perfect condition:
Floor Mats
Bushwhacker Fender Flares:
Fender Pic 1
Fender Pic 2
Husky Liner floor mats - driver side corner cut out to fit around foot rest - perfect condition:
Floor Mats
#10
I would be interested in the seat covers.
yota (at)derekbiggers.com
yota (at)derekbiggers.com
Last edited by biggs93 rnr; Mar 29, 2007 at 05:41 PM.
#14
#15
Thread Starter
Registered User
Joined: Sep 2002
Posts: 498
Likes: 0
From: Littleton, CO
pm sent back, thanks.
#18
also can you email me pics of the flares? the links arnt working they ask for password and user name
#20
Thread Starter
Registered User
Joined: Sep 2002
Posts: 498
Likes: 0
From: Littleton, CO
bryan,
currently working a deal on the flares. i should know by sunday whether they are gone or not.
the stuff i listed is what i was able to get. besides the rear bumper was demolished and the front took a hit too.
currently working a deal on the flares. i should know by sunday whether they are gone or not.
the stuff i listed is what i was able to get. besides the rear bumper was demolished and the front took a hit too.


