Cleaning out the shed (good Yota & Ford Parts)
#1
Thread Starter
Registered User
Joined: Jul 2003
Posts: 1,035
Likes: 0
From: Mooresville (Lake Norman) NC
Cleaning out the shed (good Yota & Ford Parts)
I am cleaning out my storage shed and I need to get rid of some parts. OBO.....
$50 obo
3" cornfed spacers w/ 99 4cyl coils
extra 6cyl front coils w/ factoy retainers (if you want higher spring rate) not pictured.


$250
G52 transmission w/ gear t-case
front drive shaft, shifter boots, crossmember, slave cyl.
Removed from 86 Truck w/ blown 22R with 120K, degreased, clean. Perfect for a auto conversion.

$125 ------SOLD
Dana 44 Hi pinion
1978 full size bronco front axle w/ disc brakes and steering linkage

$85
Dana 20 w/ Ford 3spd transmission
1969 Early Bronco 170 6cyl block included

SOLD front 3rd gen bumper
SOLD rear 99 Taco bumper
$30 3rd gen 4Runner limited body cladding (fender flares) hurculined
$50 - Limited CD/Tape player with amp from 1997 4Runner. Pluged directly into my brothers 87 turbo truck harness.

I have 1st, 2nd and 3rd gen running boards if anyone wants those on the cheap.
Let me know if you want more pics.
Most parts are located in Mooresvile
704.340.5225
-Jon
$50 obo
3" cornfed spacers w/ 99 4cyl coils
extra 6cyl front coils w/ factoy retainers (if you want higher spring rate) not pictured.


$250
G52 transmission w/ gear t-case
front drive shaft, shifter boots, crossmember, slave cyl.
Removed from 86 Truck w/ blown 22R with 120K, degreased, clean. Perfect for a auto conversion.

$125 ------SOLD
Dana 44 Hi pinion
1978 full size bronco front axle w/ disc brakes and steering linkage

$85
Dana 20 w/ Ford 3spd transmission
1969 Early Bronco 170 6cyl block included

SOLD front 3rd gen bumper
SOLD rear 99 Taco bumper
$30 3rd gen 4Runner limited body cladding (fender flares) hurculined
$50 - Limited CD/Tape player with amp from 1997 4Runner. Pluged directly into my brothers 87 turbo truck harness.

I have 1st, 2nd and 3rd gen running boards if anyone wants those on the cheap.
Let me know if you want more pics.
Most parts are located in Mooresvile
704.340.5225
-Jon
Last edited by Hyperlite; Apr 22, 2007 at 04:22 PM.
#3
#6
$350
W56 transmission w/ gear t-case
front drive shaft, shifter boots, crossmember, slave cyl.
Removed from 86 Truck w/ blown 22R with 120K, degreased, clean. Perfect for a auto conversion.
W56 transmission w/ gear t-case
front drive shaft, shifter boots, crossmember, slave cyl.
Removed from 86 Truck w/ blown 22R with 120K, degreased, clean. Perfect for a auto conversion.
#7
Thread Starter
Registered User
Joined: Jul 2003
Posts: 1,035
Likes: 0
From: Mooresville (Lake Norman) NC
The lift is for 3rd gen 4Runners and Tacos.
The coils have little miles on them about a year and a half. The IFS diff/CVs/rack was broken half the time so there are low miles. I noticed no sag but good flex.
The lift is still available.......
I do not have good internet access but check sometimes once a day.
704.340.5225
Jon
The coils have little miles on them about a year and a half. The IFS diff/CVs/rack was broken half the time so there are low miles. I noticed no sag but good flex.
The lift is still available.......
I do not have good internet access but check sometimes once a day.
704.340.5225
Jon
Trending Topics
#8
Thread Starter
Registered User
Joined: Jul 2003
Posts: 1,035
Likes: 0
From: Mooresville (Lake Norman) NC
Ahh you are correct.
It is a g52. Looks similar to the w56 but with different shifter location.
It does however have a 10% lower 1st gear than the w56. I fixed it in the 1st post. The tranny and the collar and the Xmember are all in perfect shape.
It is a g52. Looks similar to the w56 but with different shifter location.
It does however have a 10% lower 1st gear than the w56. I fixed it in the 1st post. The tranny and the collar and the Xmember are all in perfect shape.
Last edited by Hyperlite; Apr 22, 2007 at 04:22 PM.
#9
Contributing Member
Joined: Dec 2005
Posts: 2,226
Likes: 0
From: Houston (home), Atlanta (school), Cincinnati (work)
what side is that axle pumpkin on?
EDIT: scratch that, i suck at life
EDIT: scratch that, i suck at life
Last edited by drguitarum2005; Mar 8, 2007 at 03:53 PM.
#10
Thread Starter
Registered User
Joined: Jul 2003
Posts: 1,035
Likes: 0
From: Mooresville (Lake Norman) NC
It is drivers side and it is sold.
#12
Thread Starter
Registered User
Joined: Jul 2003
Posts: 1,035
Likes: 0
From: Mooresville (Lake Norman) NC
$150 for the coils/spacers extra 6cly coils and OME coils
call 704.340.5225 if interested
-Jon
call 704.340.5225 if interested
-Jon
#14
I'd like to know if you'll sell the 3" cornfed spacers separately? I already have RevTec 2.5" front spacers and I'd like to get another 1/2" of clearance.
Let me know.
Thanks.
Let me know.
Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
Team420
95.5-2004 Tacomas & 96-2002 4Runners
4
Jan 12, 2021 04:57 PM
FS[MidWest]: 1995 4Runner 5vz 4x4
vasinvictor
Vehicles - Trailers (Complete)
3
Jan 20, 2016 12:39 PM
XtremeOff-Road
Off Road Trip Planning, Expeditions, Trips, & Events
16
Jun 27, 2002 07:32 PM





